B16 KNOCK SENSOR!!! WTF!!!

[Berta]

i find it easier taking the head off... and then just moving it... its a 30mm..... you will get aggrivated doing it from the bottom, and even still its easier to take the head off than taking just the intake manifold off.... its a bitch, but ive done it enough times to know..

I dint have to go thru that exteme just to take the knock sensor out!^^^
I use a deepwell socket,swevel,2 extentions, and a rachet to get mines out --- from the bottom. No problems!!

[BABY J]

I am gonna grab it from the bottom in conjunction w/ an oil change... move the filter and go for it from the bottom. I will let yall know how it turns out.

J'son

[milano pink]

I dint have to go thru that exteme just to take the knock sensor out!^^^
I use a deepwell socket,swevel,2 extentions, and a rachet to get mines out --- from the bottom. No problems!!

well i am running a obd-0 block and my 30mm socket is too thick and hits the water inlet pipe, thats why i am forced to do it this way. but getting it from the bottom works too.