Danny's M3

[Danny]

absolutly...

thats what i want to do.. Only thing that worries me and makes the true difference is gettin a good tune. Sais did urs i guess?

if u dont mind me asking, what was the end cost of yours? with ECM and tunning.

[nextelbuddy]

absolutly...

thats what i want to do.. Only thing that worries me and makes the true difference is gettin a good tune. Sais did urs i guess?

if u dont mind me asking, what was the end cost of yours? with ECM and tunning.

SIAS did not tune mine. he provided me with a good basemap and teh PnP tec 3.

i have a local guy Ed Senf at balanced that tunes Electromotive he will tune mine.

right now im runing off basemap and its till loads of fun.

i am waiting for my clutch to get in and then its off to get tuned.

as for my final cost as it sits right now.

heres the list below

Turbo - Garrett T3 60-1 T04S .63 - $645 shipped http://www.honda-tech.com/zerothread?id=1351135 http://www.kineticmotorsport.com/

Manifold - Spa Racing - $415 purchased from BFC member Techno550

Intercooler - Spearco 24x10x3 Bar and Plate - $250 purchased from friend who went bigger was bought on ebay for $300 originally

Wastegate - Spa Racing 38mm Big gate - $340 - purchased from BFC member Techno550 again

BOV - HKS SSQV $133 purchased on honda-tech slightly used for 3 weeks

Motor mount - Cartech - $150

Injectors - Ford motorsport greentop 42# - $210 - purcahsed from goofynick - can also be found on ebay as well as http://www.kineticmotorsport.com/cat...tor-p-129.html for 42.50 each 6 for 255 dollars

Sparkplugs - 2 sets 1 step colder 7 series NGK4091 and 2 step colder 8 series NGK4554 - 7 series set of 6 - $11.97 8 series set of 6 $12.97 www.barnettperformance.com local performance warehouse, much cheaper than www.sparkplugs.com

Gauges - 2 1/16 CF Boost and CF Oil Pressure - boost - $56.88 - oil pressure - $63.88 - www.barnettperformance.com

2 pod pillar 2 1/16 - 21.99 - www.barnettperformance.com

Oil Feed lines - Earls and Russells -3an fittings and SS lines with 1/8npt - $92 - www.barnettperformance.com - 3 way fitting and oil feed adapter where stock oil pressure sensor goes with two 1/8 npt outputs and 1 M12x1.5 output for stock oil pressure sensor - $15 - BFC member techno550

Oil Drain lines - Earls and Russels - 10an Fittings and SS line w/-10an Oil pan fitting - $53 - www.barnettperformance.com

Wastegate and MBC lines - -3an fittings and -3an SS lines (dont want any rubber lines melting from the wastegate since its so close to the exhaust area) - $47 - www.barnettperformance.com
Total = 2537.75


Downpipe
4 bolt flange - www.atpturbo.com - 25.00
4 bolt gasket - www.atpturbo.com - 8.00
2.5-3.0 inch exducer - 15.00
o2 sensor bungs - www.atpturbo.com - 5.00 x 2 = 10.00
o2 bung plug - www.atpturbo.com - 4.50
3 inch U bend - www.atpturbo.com - 30.00
3 inch x 6 inch flex pipe - www.atpturbo.com - 36.00
Total = 128.40

Intercooler piping
Hotside - 2.5 inch universal Aluminum pipe kit - 135.00 shipped http://cgi.ebay.com/ebaymotors/2-5-I...QQcmdZViewItem
Coldside - 3.0 inch universal Aluminum pipe kit - 135.00 shipped http://cgi.ebay.com/ebaymotors/3-Int...QQcmdZViewItem

Silicone Hump connectors
2.5 inch hump connectors - 12.00x3 = 36.00 www.atpturbo.com
3.0 inch hump connectors - 12.00x3 = 36.00 www.atpturbo.com
2.5 in- 3.0 inch transition - 17.50x1 = 17.50 www.atpturbo.com

Tbolt Clamps
3.25 inch clamp - 3.75x6 = 22.50 www.atpturbo.com
2.75 inch clamp - 3.75x6 = 22.50 www.atpturbo.com
Total = 404.50




$3070.65

PnP TEC III - $2000 dollars

so far sitting at $5070.65

Then add a UUC Cerametallic Clutch and Pressure plate - 688.00

Total with everything AND clutch $5758.65

got quoted on a full 3 inch exhaust from downpipe to muffler with all flanges and O2 sensor bungs for 700 dollars with me doing nothing(good price in my opinion)

so when all said and done everything finished i wil be sitting at 6458.65 including full stand alone tec3

take away the tec3 and the entire kit sits right at 4458.65

in my opinion a pretty good price for full kit which still includes a clutch kit, full exhaust, gauges and all SS lines and great quality parts that can make over 400 hp.