Hey any shops in Georgia that can do work on a 1997 240sx, like i want a tranny and engine swap.
Hey any shops in Georgia that can do work on a 1997 240sx, like i want a tranny and engine swap.
tophatperformance.com
e-emotorsports.com
btlground
tiger racing
What engine swap?
either sr20 or rb25
rb25 you got money for a standalone?if not count the rb25 out.sr20 or ka-t would be the best route
I got dinner to goto.
We can do any swap you need. We're currently doing an RB26 swapped S13 but unless you've got a lot of money to spend I wouldn't recommend it. RB's are great for power but unless you've got serious HP goals and a large wallet its not the best choice. For roughly the same money you can have an SR putting close to the same power. Give me a call to discuss what options you want to go with and I can give you a more accurate price quote.
Ryan Reynolds
"So long and thanks for all the fish"
Tiger racing did two of my buddy's swaps (an SR in a 240 and a Rb20 in a 280z). They did an awesome job, I vouch for 'em!
welcome to 2002 ;[Originally Posted by chriduke
someone's late getting on the bandwagon...
Please tell me if you think my car looks good. But don't tell me if you think it's ugly - only on IA
what is tiger racing website, i cant find it, maybee they dont have one
Please explain.Originally Posted by SE-R_Killer
you cant run a 6 cyclinder off a 4 cyclinder ecu.there for the need of a standalone.
I got dinner to goto.
when you buy a "swap" engine set, or a "clip" it generally comes with an ECU.
hahahahahahahahahahahahahahahahahhahahahahahahhaha hahahahahhahahhahahhahhahahahahhahahahahahahahahah ahahahahahahahahhahahahahahahhahahahahahahhahahhah ahhahhahahahahhahahahahahahahahahahahahahahahahahh ahahahahahahhahahahahahahhahahhahahhahhahahahahhah ahahahahahahahahahahahahahahahahhahahahahahahhahah ahahahahhahahhahahhahhahahahahhahahahahahahahahaha hahahahahahahahhahahahahahahhahahahahahahhahahhaha hhahhahahahahhahahahahahahahahahahahahahahahahahha hahahahahahhahahahahahahhahahhahahhahhahahahahhaha hahahahahahahahahahahahahahahahhahahahahahahhahaha hahahahhahahhahahhahhahahahahhahahahahahahahahahah ahahahahahahahhahahahahahahhahahahahahahhahahhahah hahhahahahahhahahahahahahahahahahahahahahahahahhah ahahahahahhahahahahahahhahahhahahhahhahahahahhahah ahahahahahahahahahahahahahahahhahahahahahahhahahah ahahahhahahhahahhahhahahahahhahahahahahahahahahaha hahahahahahahhahahahahahahhahahahahahahhahahhahahh ahhahahahahhahahahahahahahahahahahahahahahahahhaha hahahahahhahahahahahahhahahhahahhahhahahahahhahaha hahahahahahahahahahahahahahahhahahahahahahhahahaha hahahhahahhahahhahhahahahahhahahahahahahahahahahah ahahahahahahhahahahahahahhahahahahahahhahahhahahha hhahahahahhahahahahahahahahahahahahahahahahahhahah ahahahahhahahahahahahhahahhahahhahhahahahahhahahah ahahahahahahahahahahahahahahhahahahahahahhahahahah ahahhahahhahahhahhahahahahhaOriginally Posted by SE-R_Killer
tophat or batl for quality. personally i prefer tophat cause they let me hang out and feel important and if i were going to pay someone to work on my s14 with the rb25 it would be them. with a little common sense you can do the swaps yourself and send the wiring out.
"...I'm a thief, I'm a liar, There's my church, I sing in the choir..."
SE-R Killer, you have failed. You probably met a guy that hacked up his harness, got frusrated and bought a standalone. Nor that or he was going big from the getgo.
darn i always thought when you do swaps you can only use a stand alone.or the engine wont work.ive never even seen and rb25 in person.
Last edited by SE-R_Killer; 04-25-2006 at 04:19 AM.
I got dinner to goto.
I will edit my post since I see you edited yours.
um ok?
I got dinner to goto.
Do you want me to bring up your original post and my response? because I can.
doesnt really matter i thought bout it after reading a few times.an was like"this is kinda pointless.it was jus my misunderstanding(sp?)"
yeah i didnt see your response
I got dinner to goto.
Well then here it is
Originally Posted by SE-R_Killer
Originally Posted by TheSnail
oh damn.yeah i did fail on that lol.oh i no you werent tryin to talk shit.the whole cylinder thing, i was sayin the obvious to what i was thinkin.i thought he wanted jus an engine and tranny swap.so when asked y i said that(cylinder thing).i stated the obvious,not considering an ecu was inlcuded.To me i would much rather do full standalone with a rb engine.that jus my mind frame.make much since?ive been in my own world with engine swap for awhile.
but yeah when you look at that way im a idiot.
I got dinner to goto.
Trust me Sammy at tiger racing did my swap (rb20) 280z and it's the fastes car i've ever drove.
Do they work on Mazdas also?
Yes, tiger does mazdas. Last time i was there they had several rx-7s in the shop... their # is (770) 416-1222
http://www.tigerracing.org/
Last edited by green91; 05-13-2006 at 08:42 AM.
if you dont know what your talking about, then why reply to a thread for someone that needs guidance? that doesnt make any sense.Originally Posted by SE-R_Killer
![]()
Thanks man!
Yeah Tigerracing.org did mine...Call Sam or stop by to talk to him. He always willing to stop what he is doing and go over things with you.
where'd you get that turbo heat wrap...i've been searching for one forever and i for some reason can't seem to find one
EDIT: KA-T FTW!!!!![]()
Add My IG: @The_House_Of_Honda / @Paddleshift.Photo [/b]
i forgot......if i have time I will do a search again
but I bought it from a shop in california. best thing you will ever do to your engine heat...U can actually touch that shit after a hard run and not even get burnt.
yeah i heard about that...that's why i've been dyin to find one and i can't...hard as fuck...i saw someone had one from WOTM...but i checked their site and didn't find one...![]()
Add My IG: @The_House_Of_Honda / @Paddleshift.Photo [/b]
Do you live in a county without emmisions? You'll have to register in a county without emmsions, unless you go with a KA-T.
E