i have a 98 cl that im trying to put a 95 h22 swap into. i need to know is there a particular wiring harness or wiring that has to be done. i have a obd2 to obd1 jumper harness to run the stock 95 ecu. any info would be great thanx.
98 Acura CL swap Question
i have a 98 cl that im trying to put a 95 h22 swap into. i need to know is there a particular wiring harness or wiring that has to be done. i have a obd2 to obd1 jumper harness to run the stock 95 ecu. any info would be great thanx.
Can't advertise.
Make sure that Jumper harness is a Obd2a to obd1 harness not a obd2b for a 99 and up. I think the swap should be pretty straight for'wd especially if you cl came with the F or H 2.2. or 2.3 same as an Accord.Originally Posted by BOOSTED96EK
"I be on the that Boostanite"
well i really need to know what harness to use and the h22 has a 8wire dizzy where the cl only has 4wires
Can't advertise.
A really good site to find out EVERYTHING you need for this would be www.acua-cl.com I'm on there daily.
My 2001 Acura 3.2CL Type-S
Val for president!
Yes, I would have voted for her.
In loving memory of Valerie Antranikian.
Posting Permissions
Reply With Quote