MINI ME SWAP VTEC EVU PROBLEM!!!

[preferredduck]

that is a very good possibility to have it run right. I can't say "for sure" because I haven't ever done one that way. but is a good idea to try.

atleast the head would be in time. also you can use a y7 dizzy to bolt up to the y8 head, you would need to do do a little re-wiring but i think i can help with that since i have both repair manuals. i used a y7 dizzy on a y8 head and ran a p28. but it may solve the problem. also what intake manifold are you using that is another thing i learned the hard way about.

[JGilbert312]

atleast the head would be in time. also you can use a y7 dizzy to bolt up to the y8 head, you would need to do do a little re-wiring but i think i can help with that since i have both repair manuals. i used a y7 dizzy on a y8 head and ran a p28. but it may solve the problem. also what intake manifold are you using that is another thing i learned the hard way about.

He could take all the guts out of each one and put the guts from the z6 in the y7 or y8 dizzy and it would be the correct distributor and wiring for what he has.

[preferredduck]

He could take all the guts out of each one and put the guts from the z6 in the y7 or y8 dizzy and it would be the correct distributor and wiring for what he has.

thats what i did but i think on some of them they are the same, i did not have the 92-95 manual back then, just my 96-00, but i did gut the dizzy but i think i used a d15b7 to guy and a y7 to put the stuff in and it worked fine. i'd have to look at my wiring diagrams for sure but i hated that two bolt crap everyone did.