question about cv's

[jdm-civic]

ok ive looked at a few sites for cv's and it looks like i have two options-buy custom cv's or try to rebuild mines but i was wondering if i could just use a integra halfshaft to be able to use ls axles? btw, its a 91 civic hatch with a jdm b16a and lsd tranny. help is greatly appreciated

[b17a1db2]

Passenger side is the same for 90-93 integra and 94-01 integra. Driver side, if you use 90-93 integra halfshaft that has a female end, use 90-93 integra axles, if you have a 94-01 integra halfshaft with a male end, use 94-01 integra axles. You can use 94-01 integra halfshaft/axle setup in a 88-91 civic/crx like you have. just order from an RS model, and clarify you don't want abs.

[jdm-civic]

well currently im running the halfshaft that came with the swap and lsd tranny

[RBS]

is your hatch a SI model?

[KevinT707]

Then you should be using a Integra DA axles on both sides then, since I'm almost positive that it mates with the halfshaft that came with your swap.