Results 1 to 33 of 33

Thread: no vtec after rebuild opinions needed

Threaded View

  1. #29
    Why so serious? greasemunkey's Avatar
    Join Date
    Aug 2006
    Location
    Newnan
    Age
    36
    Posts
    2,828
    Rep Power
    22

    Default

    alright update, brand new oil pan and gasket oil pickup was clean, tried swapping the solenoid with a friend again and nothing, it has however popped like 4 times half ass'd in about a weeks time back when it was cold out, I am thinking possibly the secondary igniter in the dizzy?? I did see a noticeable difference in me and my buddys setup, in that major oil port you see with the solenoid off I saw that piece sticking out much farther than his, so i took a deep well socket and tapped it back a good inch...could that cause my problem?? im about tired of this..lol, like im about to just pay mainstream to figure it out i did about everything i could except check pressure to the head. also with the chipped ecu it popped in neutral and with no vss, i have a cable speed sensor that worked its way out and it didn't matter it still managed to pop, i am sure its because of the p06 chipped for vtec to ignore the vss because it is cable
    Last edited by greasemunkey; 05-06-2010 at 12:13 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!