never had it before the rebuild, and again no cel, spent another 2 hours on it tonight, inspected the dist internals and all seems well. jumped the solenoid at high rpms in car and nothing ran my own ground to the pressure switch and nothing, took solenoid off from the head and what looks like the initial pin was pushed back out so i jammed it back in with a socked. inspected the ecu and pulled the chip, all looked fine...could be the ecu still?? have another p06 ecu that I am thinking about getting it socketed so i can swap out chips and try but thats all i can think to do. all plugs throw codes when i pull individually.