HOW DO I KNOW MY BLOCK IS BLOWN? Bseries B18b1

[youngmill]

I have an LS block got it on ah trade. The pistons are all some what down. two are half way up, an two are all the way down. Some one told me its blown, IDK tho. Just wanted to see if any one knew for sure its blown because of the pistons. The only reason my boi said its blown was simply because of the position of the pistons. Any feed bak about this is really appreciated. Holla bak

[ballistic08]

rotate the crank and see if all the pistons come to the top of the deck, if ones lower you have a bent or broken rod. if its locked up either your not trying hard enough or somethings messed up.

[98blackcivic]

what he said^

[Bus Driver J]

Can you turn the crank at all??

[NoWAyItZTOMmY]

which 2 are up and down

[STRteg]

rotate the crank and see if all the pistons come to the top of the deck, if ones lower you have a bent or broken rod. if its locked up either your not trying hard enough or somethings messed up.

X2 You have to move the crank and let the pistons run there cycle if you cant move it fairly easily probably locked up

[Black4DrEK]

LOL at thinking its blown because of the the pistons "position"

2 pistons will ALWAYS be down while the other 2 are up..

Turn the crank make sure all go up to top of deck. x100000000000

Its probly got bad rings or something..

[SleeperWRX]

LOL at thinking its blown because of the the pistons "position"

2 pistons will ALWAYS be down while the other 2 are up..

Turn the crank make sure all go up to top of deck. x100000000000

.

x2

[Black4DrEK]

On another note it ISSSSSSS SOOOOO FUCKED UPPPP!!!

Let me take it off your hands for free!!?

[boosted b]

On another note it ISSSSSSS SOOOOO FUCKED UPPPP!!!

Let me take it off your hands for free!!?

like the way u think

[youngmill]

rotate the crank and see if all the pistons come to the top of the deck, if ones lower you have a bent or broken rod. if its locked up either your not trying hard enough or somethings messed up.

Ok I willl try that. It doesn't even have the crank pulley on it. Wont I need the pulley to turn the crank?

which 2 are up and down

The two in the middle are some what in the middle. the two on the ends are all the way down.

LOL at thinking its blown because of the the pistons "position"

2 pistons will ALWAYS be down while the other 2 are up..

Turn the crank make sure all go up to top of deck. x100000000000

Its probly got bad rings or something..

I WAS JUST GOING FROM WHAT AH FRIEND TOLD ME

note it ISSSSSSS SOOOOO FUCKED UPPPP!!!

Let me take it off your hands for free!!?

Not gone happen lol

like the way u think

lol

[Black4DrEK]

.......

Ok I willl try that. It doesn't even have the crank pulley on it. Wont I need the pulley to turn the crank?

You dont need the pulley but do need the Bolt. 17mm socket


The two in the middle are some what in the middle. the two on the ends are all the way down.

Does not matter!


I WAS JUST GOING FROM WHAT AH FRIEND TOLD ME

Dont always go by 'friends' words


Not gone happen lol

Well let me know


lol

[youngmill]

.......

Hahaha I hear you. I mean I have some plans for it Its my lil project stand buy unless its waisted then I might just sell the thing to someone that wants to build it up. Ima lyk about it.

[ballistic08]

middle two move together and outside two move together, if you dont have the bolt use an adjustable wrench where the oil pump rides

[collins]

I have an LS block got it on ah trade. The pistons are all some what down. two are half way up, an two are all the way down. Some one told me its blown, IDK tho. Just wanted to see if any one knew for sure its blown because of the pistons. The only reason my boi said its blown was simply because of the position of the pistons. Any feed bak about this is really appreciated. Holla bak

just deck the block until until the top is almost flush with the 2 pistons that are up. then you'll basically have an f1 enging with a few less cylinders!





ps, do NOT do that. i was totally kidding.

[youngmill]

just deck the block until until the top is almost flush with the 2 pistons that are up. then you'll basically have an f1 enging with a few less cylinders!





ps, do NOT do that. i was totally kidding.

What? I was about to say ur trippin lol.

[Echonova]

I have an LS block got it on ah trade. The pistons are all some what down. two are half way up, an two are all the way down. Some one told me its blown, IDK tho. Just wanted to see if any one knew for sure its blown because of the pistons. The only reason my boi said its blown was simply because of the position of the pistons. Any feed bak about this is really appreciated. Holla bak

You referred to your friend as "boi"... He (as well as yourself) obviously knows nothing about motors.

Find another hobby, like rap.

[youngmill]

You referred to your friend as "boi"... He (as well as yourself) obviously knows nothing about motors.

Find another hobby, like rap.

Fuk rap I cant rap. U should have said something like school or something.. UTI or something outher than ah get rich quick with no computer skills needed like rappin. Im gud thanks tho.

[youngmill]

You referred to your friend as "boi"... He (as well as yourself) obviously knows nothing about motors.

Find another hobby, like rap.

An your right about me and motors. Thats why I always paid for my work, now im just trying to ask about thing for my self. Isn't that the reason I made this thread?

[Echonova]

Fuk rap I cant rap. U should have said something like school or something.. UTI or something outher than ah get rich quick with no computer skills needed like rappin. Im gud thanks tho.

Eff eye wuld saye go bakK 2 schuol I wuld tell U two go baK 2 eleminterary schuol 4 speeling an gramer

An your right about me and motors.

I'm always right.

[*EFilliated*]

lol

Eff eye wuld saye go bakK 2 schuol I wuld tell U two go baK 2 eleminterary schuol 4 speeling an gramer

I'm always right.

[jmmx258]

Just look for lip stick.

[youngmill]

[QUOTE=Echonova;38649794]Eff eye wuld saye go bakK 2 schuol I wuld tell U two go baK 2 eleminterary schuol 4 speeling an gramer






Really I dont care about going all the way back to change something i messed up on when It comes to writing
most of the time. Im on my helio ocean phone, and some times I mess up when texting using the landscape mode. I hate going back and correcting one letter because it takes way to long. So u can either deal with it or read between the lines. OR STOP COMING IN HERE WITH YOUR SMART ASS MOUTH! Holla bak


IM ALWAYS RIGHT! Lame!!!!!!

See what I mean about being a SMART ASS. thanks for the feed back anyways bro. Pls Move On Now.

[TommyD1919]

I don't know why but this is a funny to me. Someone told me my lucky charms were no good because I left the box open..
Im just kidding if you don't know something then you should ask... No harm in that. Kinda what this forum is for.

[NoWAyItZTOMmY]

2 middle will be all the way down and the outside will be all the way up, or vice versa

[IntegraXTR]

sounds like you need to slap your friend. Like everyone stated earlier, the middle 2 move together and the outer 2 move together. As long as you can turn the crank, then you should be fine.

[youngmill]

its good, i ckecked the block. also the guy I got it from said it just need to be honed and cleaned up. Thanks everybody for showing.

reps for you positive ppl

All pistons come up and and go down with out it being hard to turn.