**** help removing back seats on integra

[blacknightteg]

hey man. there is a few things you need to do to remove them. remove the carpet from the hatch compartment. then on each side of the fold downs (next to the window) there are two clips that are on the bar that holds them in place, remove those clips, push the seat to the center, and they will come out. the bottome has a screw and it also has two metal things that are keeping it in. once you remove the screw. just pull the bottom up and it should come off easy.

edit, i actually just red the full OP. this happened to one of my back seats, the plastic lever unscrewed from the metal part of it. just make sure its clipped in on the seat. get a pair of needle nose pliers, grab hold of the metal shaft thats actually the locking mechanism, and pull up, that should release it. if you want to put the plastic peice back on, just try to wedge it to where you can get the plastic peice over the metal shaft and screw it back it, thats all it took for me.

[J_Mee_5]

hey man. there is a few things you need to do to remove them. remove the carpet from the hatch compartment. then on each side of the fold downs (next to the window) there are two clips that are on the bar that holds them in place, remove those clips, push the seat to the center, and they will come out. the bottome has a screw and it also has two metal things that are keeping it in. once you remove the screw. just pull the bottom up and it should come off easy.

edit, i actually just red the full OP. this happened to one of my back seats, the plastic lever unscrewed from the metal part of it. just make sure its clipped in on the seat. get a pair of needle nose pliers, grab hold of the metal shaft thats actually the locking mechanism, and pull up, that should release it. if you want to put the plastic peice back on, just try to wedge it to where you can get the plastic peice over the metal shaft and screw it back it, thats all it took for me.

ill will try that after work to see if it will work thanks