Originally Posted by
gsrteg
To bleed the clutch system is like bleeding the brake system.
1. make sure your reservoir tank is full of brake fluid
2. have a friend or neighbor inside to pump the pedal.
3. tell friend/neighbor to pump the pedal 5 time with the bleeder screw unreleased yet to build pressure. (of course, you might need to use your hand to pump the pedal, cuz it might not move back up, this ok)
4. pump the pedal 5 times, hold it on the 5th pump. then release the bleedr screw, and fluid will squirt or drip.then tighten.
5. then pull pedal back up, and repeat process of pumping, then releasing the bleeder screw. to build pressure in the clutch lines.
6. make sure you keep an eye on the reservoir tank, not letting it get empty, or else there will be bubbles in the line.
Hope this makes sense somewhat.
Posting Permissions
Reply With Quote