Quote Originally Posted by blue_gt View Post
x3 way to check if its still good is to take it out and hook a negative and positive wire from your battery to the blower motor ( hold the bottom of the blower motor and grip it good ) it should spin. if it doesnt than the motor is dead. if it does than your switch is bad or no power is going to it
NOOOOO

Want to start a fire!!!

hOLLA SHITT

take a test light and check the power and ground from the blower connector you can turn the switch on and off to see if its getting P&G
If it is tap on the blower while your switch is on High if it comes on replace it, if it doesnt replace it because your getting a P&G so it has to come on... If your switch is on high and it works but not on the low speed its your blower resistor. If you don't have a P&G check fuses