Results 1 to 12 of 12

Thread: Heater doesnt work

Hybrid View

  1. #1
    you live and learn Theycall_Metue's Avatar
    Join Date
    Jun 2008
    Location
    barrow county
    Posts
    1,637
    Rep Power
    19

    Default

    Quote Originally Posted by Black4DrEK View Post
    You dont feel ANY air?

    check the blower motor, test it.
    x3 way to check if its still good is to take it out and hook a negative and positive wire from your battery to the blower motor ( hold the bottom of the blower motor and grip it good ) it should spin. if it doesnt than the motor is dead. if it does than your switch is bad or no power is going to it

  2. #2
    Senior Member | IA Veteran
    Join Date
    Jul 2007
    Location
    Not on IA Anymore !!!!!
    Posts
    17,879
    Rep Power
    0

    Default

    Quote Originally Posted by blue_gt View Post
    x3 way to check if its still good is to take it out and hook a negative and positive wire from your battery to the blower motor ( hold the bottom of the blower motor and grip it good ) it should spin. if it doesnt than the motor is dead. if it does than your switch is bad or no power is going to it
    NOOOOO

    Want to start a fire!!!

    hOLLA SHITT

    take a test light and check the power and ground from the blower connector you can turn the switch on and off to see if its getting P&G
    If it is tap on the blower while your switch is on High if it comes on replace it, if it doesnt replace it because your getting a P&G so it has to come on... If your switch is on high and it works but not on the low speed its your blower resistor. If you don't have a P&G check fuses

  3. #3
    you live and learn Theycall_Metue's Avatar
    Join Date
    Jun 2008
    Location
    barrow county
    Posts
    1,637
    Rep Power
    19

    Default

    Quote Originally Posted by ASE*Tech View Post
    NOOOOO

    Want to start a fire!!!

    hOLLA SHITT

    take a test light and check the power and ground from the blower connector you can turn the switch on and off to see if its getting P&G
    If it is tap on the blower while your switch is on High if it comes on replace it, if it doesnt replace it because your getting a P&G so it has to come on... If your switch is on high and it works but not on the low speed its your blower resistor. If you don't have a P&G check fuses
    how the hell will it cost a fire to test the blower motor lmao
    its a 12v current that goes to the blower motor at high speed

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!