ok well the rear end of my truck is like this. It sits a lil higher than the front. I can get a shackle kit that I can drop the rear 1 to 2 inches. The rear end is above the leafs so I could get a drop block kit and lower the rear a lil more. question is where would I take my truck to have the front coils removed cut and replaced? I myself don't have the equipment to put the springs back on. don't have the correct coil compressor. I'm only looking to get about 2 inches up front and at most 4 inches in the rear. I don't wanna take a leaf out because the truck is VERY heavy. 5400 lbs on a mid size truck isn't anything to light lol. But thanks for the advice. i'll be def droping the rear end down a lil bit. and hopefully dropping the front soon ! Also looking for some 18's or 20's to add to it! may wait to drop it till i get the rims on it because I don't wanna chop my front end down then not be able to get the full turn on it. so if anyone know's of some decent cheap set of 5 on 5.5 rims lemme know!