Quote Originally Posted by jellybean
if it came with a b16 which they do... but to switch from a d series to a b series is a big hastle... motor mounts wont work.. ecu needs changed... pretty much have to swap a obd1 system to an obd2 which can be a pain... b series also has 2 o2 sensors while d series only has one... so would need to accomodate for that as well...:-)
lol!

Motor mounts? A few bolts to swap out new ones?

Change ECU? Remove the cover and remove a couple bolts? Unplug ECU, plug new one in...

OBD1 to OBD2 conversion? They make conversion adapters. My OBD2b to OBD2a was home made...

b-series has 2 o2 sensors? Only OBD2 cars have two and since a conversion adapter harness would be used you wouldn't need both anyways.

The real issue is finding axles to work without swapping out all the suspension...and that's not even difficult.



Quote Originally Posted by LaotianAsn4
I just swapped over from a d16 to a b18b....really easy swapped, i'd recommend it

The h22 isn't worth all the trouble and handling problems that come...you lose your turning radius and your front to rear weight ratio is completely thrown off.
The whole 35 extra lbs is gonna cause you to drive straight off a cliff right. The saving of switching to a carbon fiber hood would compensate for it.

Need proof, see them on a scale...
http://honda-tech.com/showthread.php...ght=h22+weight

The H22 is the best bang for the buck. 30 seconds on a search engine will yield a complete parts list for both the B and H conversions in a Del Sol. People have been doing it for well over a decade now and bolt in kits are readily available everywhere. It's a simple swap. Screw using an automatic transmission though! Manual conversion are easy on that chassis. OP needs to learn to drive a stick.