SWAP HELP

**NOCLUE** · 02-21-2009, 07:46 PM

ok well my b18b1 is out of order and i am geting a b18a1 will anything be diffrent
if so what do i need is all the wire hook ups the same exx. THANKS

**EmminoDaGreat** · 02-21-2009, 07:49 PM

ya, where the "fan switch" is is different, you will either, A: extend the wires to the sensor, or B change thermostat housings. hmm, I cant think of anything else off the top of my head, besides throttle bodies being different...

**NOCLUE** · 02-21-2009, 07:58 PM

well the a1 came with a throttle body+mani

**NOCLUE** · 02-21-2009, 07:58 PM

A: extend the wires to the sensor, or B change thermostat housings.

**yunglaosta** · 02-21-2009, 08:01 PM

wouldnt u have to change it to obd0? its a b18a right?

**NOCLUE** · 02-21-2009, 08:12 PM

B18b1 TO B18a1

**Barefoot** · 02-21-2009, 08:58 PM

Originally Posted by yunglaosta

wouldnt u have to change it to obd0? its a b18a right?

y would it have to change it to obd0

**Tensa_Zanget** · 02-21-2009, 09:20 PM

no he dosent need to change it to obd0, b18a1 comes in obd1 too

**yunglaosta** · 02-22-2009, 10:37 PM

Originally Posted by no mo hondas

y would it have to change it to obd0

i thought the b18a was just obd0, which i thought you would have to convert it to obd0 to work. welp i just learned something new

**yunglaosta** · 02-22-2009, 10:38 PM

Originally Posted by Tensa_Zanget

no he dosent need to change it to obd0, b18a1 comes in obd1 too

ahh ok, didnt know that, come to think about it your right

**NOCLUE** · 02-22-2009, 10:40 PM

Well thanks for the info, and we both learned something

**OG-Skinny** · 02-23-2009, 01:23 AM

Use the B18B1 intake manifold, throttle body, Thermostate housing, and Wiring harness and transfer all those onto the B18A1.

vola, you have a Pulg and play OBD1 LS motor again.

**NOCLUE** · 02-23-2009, 01:59 AM

Originally Posted by OG-Skinny

Use the B18B1 intake manifold, throttle body, Thermostate housing, and Wiring harness and transfer all those onto the B18A1.

vola, you have a Pulg and play OBD1 LS motor again.

what gasket do i get the b18b1 or a1 does it matter

**yunglaosta** · 02-23-2009, 11:15 AM

dont think it should matter

**blaknoize** · 02-23-2009, 11:43 AM

Nope, I just did this about 3 weeks ago. Ignore all the plug locations that cannot be connected. Other than that, its plug n play.

**NOCLUE** · 02-23-2009, 11:54 AM

Kool, i will post up some more ? later

**NOCLUE** · 02-24-2009, 12:53 AM

well about to start swap 2mar

**NOCLUE** · 02-24-2009, 12:33 PM

will b posting up pics later, and got some more ? about the swap

**Black4DrEK** · 02-25-2009, 03:16 PM

when you doing this , need some help my dogg??

**NOCLUE** · 02-26-2009, 05:33 AM

ya need help geting it out and off the tranny

**NOCLUE** · 02-26-2009, 05:52 AM

b18b1

**NOCLUE** · 02-26-2009, 05:54 AM

**NOCLUE** · 02-26-2009, 05:59 AM

**Black4DrEK** · 02-26-2009, 09:28 AM

nice .. im probly gonna come over today fool!!

**NOCLUE** · 02-26-2009, 11:34 AM

Kool just give me a call

**yunglaosta** · 02-26-2009, 01:51 PM

your swap looks good man! keep it up!!! in for more details

**NOCLUE** · 02-26-2009, 03:08 PM

thanks man

**blaknoize** · 02-26-2009, 09:29 PM

LMK if it boggs likea bitch, I wanna kno what u did to correct it and if u happen to NOT have a cold idle.

**yunglaosta** · 02-27-2009, 12:21 AM

Originally Posted by blaknoize

LMK if it boggs likea bitch, I wanna kno what u did to correct it and if u happen to NOT have a cold idle.

does your car bog like when you take off in first sometimes, and in some gears sometimes? if so its your distributor. i would know, its happening to my car to

**NOCLUE** · 02-27-2009, 03:59 AM

yea i think but it can also be my tps, its bad

Thread: SWAP HELP

Thread Tools

Display

SWAP HELP

Posting Permissions

About us

Announcement