92-96 Prelude Fog light wiring write-up.
i found this while i was looking how to wire mine.helped me quite a bit, so i figured someone may need it.
whats needed:
12-14 gauge wire
wire cutters/strippers
assorted connectors and wire taps
electrical tape
For the most part this is a pretty easy project if you can follow the diagram and strip and connect wires.
besides following the diagram there are only a couple little things to be aware of.
1.)make sure that you just tap into the positive wire of the corner light. do not just directly connect it to the relay,or your fogs wont turn on and neither will your corner lights. the relay uses the power from the light to turn on the fogs.
2.) i would recommend that you put at least a 20amp fuse in between the battery and relay for extra protection. if the 20amp blows then a 30amp fuse might be needed. most relays provides protection up to 40amps.
3.)if you have an OEM fog switch you can wire that in between the corner light and relay. but when wiring the OEM switch it has to be wired a certain way or the light on the switch will always be on. (look at second diagram)
4.)when wiring the OEM switch there are 3 wires coming off of it
black=ground
red=goes to positive of corner light
orange=goes to relay
i will double check on the red and orange wire b.c i did this a while ago and im going off of memory
without switch
with switch
Reply With Quote
