EURO DYNO DAY? who is down?

[AirMax95]

For a reliable 300 horsepower you can probably do it by upgrading to a k04 turbo, Downpipe, GIAC (the best software) ,exhaust, intake and front mount. And you should be close to your numbers. Talk to brian at Eurotech he is the man when it comes to your motor. And all that stuff should run you more then about 4000$. You have a 1.8 right?

There is a huge difference in platforms between a subie and an audi. Your audi is a luxury car, subie's arent is the bestest difference.

The K04 will get me 300 to the pavement, or to the crank? I am shooting for 300 to the wheels, reliably. I will have all supporting mods, but the turbo/software choices are confusing me. The more I read, the more pissed I get, lol!

I will call Eurotech and get the expert inside scoop.

Yes, it is a 1.8t.

[4dmin]

The K04 will get me 300 to the pavement, or to the crank? I am shooting for 300 to the wheels, reliably. I will have all supporting mods, but the turbo/software choices are confusing me. The more I read, the more pissed I get, lol!

I will call Eurotech and get the expert inside scoop.

Yes, it is a 1.8t.

i would say you get probably get approx 275whp/325lbs w/ a k04/e05... if you want to make more then that you will need to step up into a gt28r type turbo...

honestly i would go k04/e05 + GIAC + tt 225 injectors/maf + 3" dp + 3" exhaust + intake + dv + new n75 + larger inlet pipe ... 1.8t motor is good for about 350whp if it is well maintained

[AirMax95]

i would say you get probably get approx 275whp/325lbs w/ a k04/e05... if you want to make more then that you will need to step up into a gt28r type turbo...

honestly i would go k04/e05 + GIAC + tt 225 injectors/maf + 3" dp + 3" exhaust + intake + dv + new n75 + larger inlet pipe ... 1.8t motor is good for about 350whp if it is well maintained

Sounds like a plan! MM is doing my maintenance from now on. They are freaking awesome.

Time to break out the spreadsheet and start throwing numbers around!