EVERYTHING BELOW WAS PULLED FROM VORTEX I QUOTED WORD FOR WORD SO YOU DON'T EVEN HAVE TO LOOK, SO BEFORE YOU GET DEEP IN THE BS READ WHAT PEOPLE ACTUALLY DYNO. ALL FOUR CHIP COMPANIES ARE REPRESENTED BELOW: APR, GIAC, REVO, & UPSOLUTE!!!
BY THE WAY GIAC X+ RULES!!!![]()
http://forums.vwvortex.com/zerothread?id=1973676
Here is bone stock vs APR 93 on my 20th
stock 159.4hp/163.3lbs
apr 93 178.4 hp / 201.6 lbsAPR 93 on my 20th with:
N75J
EVOMS front mount intercooler
GHL turbo-back
Carbino CAI
Samco turbo inlet
202.1hp / 245.0lbs04' GLI w/ APR stock exhaust
1st: 180.1hp / 202.6lbs
2nd: 190.4hp / 214.8lbs
04' GLI w/ APR , 2.5 DP, Exhuast, n75
196.37hp / 232.66lbsGLI, GIAC X+, N75j & CAI
197.7hp03' 20th with: GIAC v.11 93 oct
3" GHL turboback
ECS pullies
Samco TIP
Samco hoses
Greddy Profec II spec B set to 17.5 psi
EVOMs fmic
EVOMs cai
custom 8 gauge grounding wires
198.6hp / 243.6lbs
198.4hp / 249.6lbsStock Ko3s w/ 116 octane mixed w/ 93
EVOMS FMIC
EVO DV
N75J
APR-91
Samco Inlet
Carbino CAI
GHL 2.5" turbo back
208.3hp / 252.5lbsHere is my latest run compared to my best run on GIAC v12.
mods were:
GHL CAI (may soon be replaced my modded airbox)
4BAR FPR
EIP Dogbone
2.5" Techtonics TB
Samco TIH
N75J
Forge 007p
GIAC X+
203.6hp / 260.4lbs
193.1hp / 259.0lbsstock w/ K&N CAI & 2.5 MagnaFlow Exhaust
166.00hp / 177.18lbs
177.71hp / 181.23lbsRevo, CIA, 007
181.3hp / 223.9lbs
190.9hp / 242.9lbs2.5in GHL TB, APR 93, GHL CAI, Hyperboost DV.
193.8hp / 204.3lbs
189.2hp / 214.8lbs
188.8hp / 202.4lbsRevo & autotech intake
188.69hp / 227.27lbs
stock w/ intake 166.75hp / 178.06lbsHere are the mods I have:
Revo 4bar w/ SPS3(HB4, T5)
Forge 007 DV
N75H
Neuspeed CAI
Milltek 2.5" TB
NGK Iridium 1 degree colder plugs(BKR7EIX Iridiums)
Home made grounding kit.
202.3hp / 232.7lbsMods include
AEM CAI
APR DPP stock and 93
Forge 007 dv
161hp / 162lbs
159hp / 188lbs
165hp / 197lbsBlack Magic Pearl #0144 - APR S,91,93,100 - NS P-Flow - Eurosport 2.5" DP - NS SS - EVOMS FMIC - NS 28mm RSB
Personal best: [email protected] 2.023 60'
214.24whp 251.21wtqMods are:
UPsolute chip
3" DP
2 1/2" non mandrel bent custom exhaust no cat or resonator
water/meth injection
188.89hp / 232.73lbs
190.49hp / 251.02lbsRevo 4 bar, 4 bar FPR, AEM CAI, 2.5 TT exhuast, Baily dv, N75, 100 octane
206.98hp / 256.85lbsBoth pulls were in 4th gear.
APR DPP Stock: 169.6hp/169.2ft-lbs
APR DPP 93: 198.0hp/220.8ft-lbs
APR 2.5" DP
Evo CAI
Samco/Forge TIP
007 DVBoth pulls were in 4th gear.
APR DPP 93
1st Run: 210.2hp/229.4ft-lbs
2nd Run: 208.27hp/226.58ft-lbs
Evo CAI
Samco/Forge TIP & 5 pc Kit
007 DV
N75H
ECS Pullies
GHL 3" TBthis is my 2005 GLI 3inch DP into stock 2 1/4, QTP electronic dump going on tonight!!!!! mods are revo 3 bar, LB-9 T-3 on **** gas!!!
188.3hp / 242.5lbs
185.5hp / 227.2lbsstock w/ CAI
kinda hard to see, hp was 161.9, torque was 181.9.