MKIII

[SX-MAN]

Hey there,

Yes, the 2JZGTE does fit. For the '88, you need to either swap in the crossmember from the '89.5 or later, or use a set of aftermarket mount brackets.

On the 2JZ I think that there's a small part of the firewall that needs to be "relieved" slightly, if you're going to use the stock twin turbos.

You'll want to make sure that you either get an engine with the right oil pan configuration, or change the oil pan. You need the rear sump, and since most 2JZs come from Aristo cars (front sump), you need to get a 2JZ or 1JZ rear sump oil pan setup from a US 2JZGTE (Supra) or a 1JZGTE oil pan (Soarer or Supra).

Plus you'll need it wired up: http://www.phoenixtuning.com/

-Doc

thanks bro... how much for wiring? i can get it in and ready to go but might get stuck on that... and now i think about it... what trans would you use?..

its auto want to go manual...R154?? V161????