Heheh thanks for the comments guys


Took the intake manifold all apart and cleaned everything. I thought taking the electronics off would be a good idea before giving the manifold a bath in the parts washer



Cleaned up and put back together:



Installed. Also built a custom bracket to hold the power steering resevoir in place here.





When the car came to me the hydraulic fan for the SC400 was missing, and he wanted to use the Aristo hydralic fan. Since the housing didn't quite line up to the SC400 radiator, I had to weld up some custom brackets. Cleaned up the shroud a bit too.



Custom p/s line:





Custom fuel line: