carbon fiber???

[UpSideDownDesi]

both jason (speedminded) and mike (buky) are correct on their part. My CF hood on GSR was foooked...took my time wet sanding it down with a 400 grit few times and i was able to sand the fade out (it didn't go all they way down)....remember i used 400 grit because i was gonna get my hood recleared. No way you'll be able to dig down the oxidation with 1500-2000 grit....that will only take care of surface/minor fade. Now my hood looks good as new with just 1 coat of clear. If you wanan save money for now and only have minor fades on the hood then go ahead and wet sand it, but if you want 1 time done deal....get it recleared.

[andrewz21]

thanks dude its honestly not that bad some people dont notic it but i do i may try to wed sand it and see where im at with that..if not buky ill be seeing you soon!! ..lol..so after wet sanding it what can i polish it with?? any normal car polish will work?? and same with the wax??

both jason (speedminded) and mike (buky) are correct on their part. My CF hood on GSR was foooked...took my time wet sanding it down with a 400 grit few times and i was able to sand the fade out (it didn't go all they way down)....remember i used 400 grit because i was gonna get my hood recleared. No way you'll be able to dig down the oxidation with 1500-2000 grit....that will only take care of surface/minor fade. Now my hood looks good as new with just 1 coat of clear. If you wanan save money for now and only have minor fades on the hood then go ahead and wet sand it, but if you want 1 time done deal....get it recleared.