Coverting twins to a GT28RS?

[Archlab]

I have recently ordered a RB26DETT and was having fitment issues with custom making a twin downpipe (I dont wanna custom make one that is pretty much the problem) and i got a GT28RS .60 turbo layin' around. so my question is...is the GT28RS .60 a big enough turbo to convert to single turbo on a RB26DETT, would I be losing power? Would it just be stupid, pretty much what I am asking is what kind of turbo do I have on my hands here?
I do not know how to tell if one turbo is bigger than the next?

[speedminded]

I have recently ordered a RB26DETT and was having fitment issues with custom making a twin downpipe (I dont wanna custom make one that is pretty much the problem) and i got a GT28RS .60 turbo layin' around. so my question is...is the GT28RS .60 a big enough turbo to convert to single turbo on a RB26DETT, would I be losing power? Would it just be stupid, pretty much what I am asking is what kind of turbo do I have on my hands here?
I do not know how to tell if one turbo is bigger than the next?

Personally i'd think a GT35R would be better suited but not positive on a completely stock engine, i'll look for the graphs...

[speedminded]

Here's a few examples on one, still looking for both the GT35r and Garrett T04Z...

[speedminded]

hrmm... RB26 with single T45S seems to be making 580-600 around 1.5bar

[Doppelgänger]

Nah, a T28 is WAY to small for an engine like that. But what might help your question get answered better is, what are your power goals? The twins that are on there are bb turbos and are quite good and it'll take a good sized single to make up for loosing the twins. I even thing a GT35 would be too small. GT40 or bigger.

[speedminded]

Nah, a T28 is WAY to small for an engine like that. But what might help your question get answered better is, what are your power goals? The twins that are on there are bb turbos and are quite good and it'll take a good sized single to make up for loosing the twins. I even thing a GT35 would be too small. GT40 or bigger.

Exactly, decide on the numbers you'd like then go from there... How about GT35R [twin scroll] w/ 1.06 rear?


Ah, here's one...

"Dynod my car yesterday, we ran in to a problem with the fuel system, I need to mount the second 044 motorsport pump. We could not go past 1.5bar and 7.000rpm because the fuel pressure started to drop

But it made 625hk/655Nm at 1.5bar (564HK/590Nm @ wheels) max tourqe was at 6500rpm but I think that will be at lower RPM when I can run 1.7bar"


RB26DETT motor
GTR Garage exhustmanifold
Trail 44mm WG
Garret GT3540R Turbo
Sard 1000cc dyser
Sard Fuelrail
Nismo N1 Oljepumpe
Nismo N1 vannpumpe
ACL race bearings veiv og råder
Eagle Rods
ARP 2000 rod bolts
CP pistons
Tomei 1.2mm headgasket
Tomei valve springs
Tomei 260 9.3 in/exhauste
Tomei kam sprocket
ARP Head Studs
ARP Main Studs
Carbonetics Tripple carbon clutch

[Vteckidd]

WAY TOO SMALL

Id do Twin 25Rs like Ivansnow and make 450whp

Ill buy that 2860 off you thought for my SR

[Archlab]

So I need me a GT40 then, what A/R etc. should I be looking for?

and why are turbos so hard to find on the internet, cant find a damn place to find one much less descent prices wow?

[Vteckidd]

i can get Garretts.

if your going for SINGLE, MINIMUM id run is a 35R, good for 500-600whp, but a nice powerband since you have a big motor.

PT67 is nice too

[Z U L8R]

thumper ftw

[chituntang]

I just want to say RB26DETT engines comes with 2 t28 turbos, so putting a better t28 turbo to replace is something silly...

You just need to know swapping engine needs a lot of custom parts.

[JPB]

ill take that turbo off your hands...pmed

[yerrow]

I just want to say RB26DETT engines comes with 2 t28 turbos, so putting a better t28 turbo to replace is something silly...

You just need to know swapping engine needs a lot of custom parts.

a t28 and a gt28 is not the same thing

[00CelicaGT]

THOSE ARE ABOUT THE SIZE OF A T3/T4 TURBO