Someone say brakes on a Honda?
The issue is an 11mm offset wheel. If you want to run it then you're going to need longer studs and spacers: ARP studs & H&R or comparable spacers will do the trick -- simply use washers on the studs before putting on the wheel to judge how much spacing you'll need...BUT along with that you'll need an ultra stiff suspension setup to prevent the tire from hitting the fender. Plus you'll want to replace the bearing when the hub is pulled apart.
It's a never ending story if you're not careful with your wheel, brake, and suspension selection. Click the 2001 Integra link in my sig for more info on my Porsche brake setup...
Reply With Quote