i'm a noob, ENGINE REBUILD VS SWAP!

[fight club]

if your rings are bad your looking at a labor intinsive job. "bad rings" refer to the piston ring <just as info>. to remedy this problem your would be dissassemblying the block. as far as which way to go. both have their ups and downs.
if you swapped, you could put in a higher hp engine etc. take a bad time and turn it good by building the engine as well. this is costly.
you could rebuild it, and rebuild it stronger with mods. this is also slightly costly.
or just rebuild it.
or just swap it. lol

either way if you are going to do either make sure someone who is experienced is there to help. i personally would rebuild it but with higher comp pistons, cams, maybe some independent throttle bodies.....

[2.0civic]

if your rings are bad your looking at a labor intinsive job. "bad rings" refer to the piston ring <just as info>. to remedy this problem your would be dissassemblying the block. as far as which way to go. both have their ups and downs.
if you swapped, you could put in a higher hp engine etc. take a bad time and turn it good by building the engine as well. this is costly.
you could rebuild it, and rebuild it stronger with mods. this is also slightly costly.
or just rebuild it.
or just swap it. lol

either way if you are going to do either make sure someone who is experienced is there to help. i personally would rebuild it but with higher comp pistons, cams, maybe some independent throttle bodies.....

do you have any idea what you are talking about?? its INDIVIDUAL throttle bodies not independent

[fight club]

do you have any idea what you are talking about?? its INDIVIDUAL throttle bodies not independent

i mix up those words frequently for some reason. slip of the tongue i guess.