Quote:
Originally Posted by Ricer
NOOOO!!!!!
Black with polish lip is a BIG NOOO NOOO!!!
But, thats just me! :D
Printable View
Quote:
Originally Posted by Ricer
NOOOO!!!!!
Black with polish lip is a BIG NOOO NOOO!!!
But, thats just me! :D
Dude, powdercoat them black and roll with it. It will look badass!! Hell, look at my car (I know it isn't silver but still). LOL
Quote:
Originally Posted by firby911
Would something like this work? If so I'm your huckleberry.
http://i577.photobucket.com/albums/s...126101913a.jpg
What's been going on people?
helllo jamese! going out to dinnnnerrr, when do we see u again :(
As soon as it starts to warm up :DQuote:
Originally Posted by JDMbabe
I'm still holding a grudge against you because you didn't say hi to me and justin :cry: WHAT A BITCH!! lol jkQuote:
Originally Posted by BluesClues
You better come out this friday!!
Quote:
Originally Posted by BluesClues
whoa! long time no see
I've got a set thats been in my tool box for who knows how long.Quote:
Originally Posted by firby911
They could be for Tein, Megan, Apexi, or BC coils.
I work this friday :( But if I get out in time before everyone leaves I will make a drive by lolQuote:
Originally Posted by roxie911
Yeah. Had to handle life for a momentQuote:
Originally Posted by Ricer
Quote:
Originally Posted by Dr.G35
i like :goodjob:
Need to clean the Faggin Wagon. its lookin pretty crapy at the moment. :no:
Can we try it rob? He has H&R coilovers but no wrenches. :thinking:Quote:
Originally Posted by r0bb86
Quote:
Originally Posted by BluesClues
It sucks when it gets away from you sometimes doesn't it. And always at the most inopportune time.
Sure does!Quote:
Originally Posted by Schroeder
DO IT DO IT DO IT DO IT DO IT NOW!Quote:
Originally Posted by Ricer
I never got one DrG......:(
And a quick question to anyone with a car trailer. Can i borrow it saturday?
:love:did I neg rep u if I did I'm sorryQuote:
Originally Posted by Ricer
Quote:
Originally Posted by BluesClues
yay that will be awesome! can't wait to see you!
Same here!Quote:
Originally Posted by JDMbabe
What's with all the white cars?
I'll post this one, 'cause it's local and I've sat in it (Captain wouldn't let me drive it, but I could sit in it. :D )
http://i188.photobucket.com/albums/z...68celica01.jpg
Ya'll are welcome to have them. They've just been sitting in there taking up space.Quote:
Originally Posted by h23bb2
Awesome,are you going to be at the meet Friday?Quote:
Originally Posted by r0bb86
I might drive by there on Friday night, I can probably just drop them off then.Quote:
Originally Posted by firby911
LMK if ya'll need em before then, I live right by Ashley Park but I'm usually only available from 5-6pm in the evenings.
Be prepared
I had to do it
http://i579.photobucket.com/albums/s...8/38a13bfe.jpg
^sad thing is, i can't stop looking at it, lol. It's one of those things you wanna stop looking at but you just can't help but to look and stare.
I can't stop thinking about it and laughing
It's probably creeping a bit because of the catless up pipe. When I went to a catless set up, i had to replace a restrictor pill in one of my hoses going to the turbo. I would not recommend upping the boost without proper engine management, as you could really mess it up. These motors are finicky like that. I run a Cobb Accessport, but most any engine management will work for it. You find people are hardcore dedicated to certain brands of engine management, so it's up to you lol.Quote:
Originally Posted by h23bb2
See you all on Friday
Anyone wanna come help me line up the spline to put my tranny back on?
That son of a bitch just doesn't want to work with only one person.
Ultimately, Cobb Accessport is where I'm headed. Fortunately, with the 02-03 cars the ECU takes kindly to a MBC, moreso than th 04-05s and definately better than the 06-07 "Hawkeyes" like yours. Its my understanding the the ECU is able to accomodate up to 17psi at WOT without any tuning solution. I fall below this range (max boost of 16.4 in fifth gear and it drops lower in every gear- approximately .5-1psi per gear)Quote:
Originally Posted by redmanhart
The problem with a MBC arises when you start running a high boost level at part throttle. The ECU compensates, but it has the potential to run borderline unsafe lean and consequently very high cylinder temps. I'm doing two things to compensate for this, one running one step colder iridium plugs, and two keeping an eye on my boost gauge. If i start to see more than 8-9psi at very low throttle, I usually go ahead and downshift just to try and avoid extremely lean A/F ratios.
On a side note the CEL was from when I installed my TT yesterday morning, I hooked it up to the vehicle speed sensor wire at the ecu, but lacked the time to solder it and it came undone. :screwy: After school I found an Autozone and got the code, borrowed some tools, bought some tape and fixed it on the spot. :bump:
Now I just need to install my front lip and finish cleaning it up. Joe? you ther? Oh, Joe?!?! lol
Invest in a WB 02 sensor and gauge. It'll save you a lot of money one day. :)
I know. I just figure I can put that money towards a cobb accessport and not have to worry about it as much, but then again it'd still be a good idea to have one.
You halfway recommended one to me last week. I don't remember which one you said:(
Factory wideband O2 ftw! :bump:
So yeah. I'm about to warm up some pork chops, green beans, and cheddar brocolli rice I made for dinner last night. nom nom nom
Factory warranty inhibitting higher performance ecu tuning FTL. Can't have your cake and eat it too eh Bryan? lol
Just out of curiosity, what is the difference between a wideband and narrowband????
Actually I can increase performance while keeping my warranty.. Gotta love a factory "stage 1" upgradeQuote:
Originally Posted by h23bb2
Mmmm.. Cake..
Thats why I said higher instead of high. I know there's the factory stg one, but its not as good as the HP Tuners?
Your looking at a rich double chocolate cake but eating stale vanilla wafers. lol
Are you sure it's a WB and not a narrowband?Quote:
Originally Posted by Ricer
Oh and about painting your factory wheels. Please don't do it. They look good as they are today.
It better not be cold on friday! im not sure if me and jey are coming yet, we are going to the atl, it 3 year anniversary weekend! although it was really yesterday.
Lol.. I wouldn't consider a bump of 70 wheel tq a vanilla wafer. It is for sure not what you can get from HP tuners.. But they are starting to pop motors running 30psi on a stock turbo/motor.. Go figure.. haha