Vid from Friday night me vs anthony(00celicagt). He got the jump.
B16>ZC
My g/f didn't video me vs jermaine(jdmjaydc2) but he got too. Dare and I didn't get to line up.
Vid from Friday night me vs anthony(00celicagt). He got the jump.
B16>ZC
My g/f didn't video me vs jermaine(jdmjaydc2) but he got too. Dare and I didn't get to line up.
Haha, how was your race against Jermaine in relation to you and Ant? Who didn't get 'd as bad? lol
Bozzio for president.
hmmm....we'll have to wait until we get it on video I guess. Couldn't really say.
lolOriginally Posted by 90_ZC_HATCH
no idea
jermaine but I don't think he went when we did and then dare does the ricer fly by lol
who knew you were gonna record it lol i wish we could have gotten some with some light i wanna hear how my car sounds in vtec
yes my car is still OBDO.
and i think Matilda (name of my car) held her own against 3 B16's
Like ass.Originally Posted by JDMJAYDC2
"I'm not a gynecologist... but I'll take a look."
hey alan is there a big difference between being obd0 or obd1 wit the ZC.
Id say the ZC put up a fair fight with the b16! with the 20~25hp difference this is almost exactly how id expect it to end.
lol Alan
I'm OBD-1 too so now I have the advantage and my center garnish haha
My camera sucks at night so it's hard to really see. I gotta get a new one or start doin races during the day.
Oh yeah and my motor is low compression
Originally Posted by 00CelicaGTwell supposedly it's a 10 hp difference, 137hp to the crack for obd1.Originally Posted by southside
also, I'm using a p29, which is the ecu that came with the obd1 ZC's. hard to get your hands on if you can find them.
i'm not sure what the difference is between obd0 and obd1 because i've never been in an obd0 zc hatch.
also i have the cable zc tranny. Ant i think you just need to ride in mine so you can see for yourself . it's a fun little car, but i'm ready for an upgrade
In general obd1 maps have higher resolution and generally run smoother and have better temperature corrections etc. But overall power i doubt theres much difference unless its got more advanced timing.
i might have to convert mine to obd1 to see the difference for myself. plus i think if i had a tranny wit a little shorter gearing i might have put up a better fight. the Si tranny has really long gears.
It seem like no one could keep up with me
and that wasn't a ricer flyby because Ant was still going
Originally Posted by bigdare23
Well good luck on that homie, because y'all were lucky that I had to leave for work
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
Originally Posted by EJ1soSlo
Tony, you do remember that last time we race I had a d15b2 and a 4 spd tranny in the hatch weighing my car down and I pulled on you. Just imagine when my car has only one engine in the car.
*POPS COLLAR*
Originally Posted by bigdare23
And darryl you do remember I was running off 2 cylinders, block is in the garage if you want to check
So if that's the best you could do to me off 2 wow I really can't image the damage on when I have all 4 ZOMFGGOMAKAFAWKNHAMSANDWICH
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
Do you need someone to iron that collar for ya since it's pop'n off everywhere like it's VTAKKKKKKKKKKKKKKKKKKK lol
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
Currently Active Users Viewing This Thread: 4 (4 members and 0 guests)
EJ1soSlo, bigdare23, Just_CHill, 00CelicaGT
Damn Darryl, you been in here for a while I know that it doesn't take you that long to have a witty comeback
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
Originally Posted by EJ1soSlo
Originally Posted by EJ1soSlo
So you was running on 2 cylinders but was able to pull on another b16 (jdmjaydc2) that was running on all 4 cylinders. thats a fishy story. Plus, you wouldn't had made it from the southside to mainstream on 2 cylinders.
Just admit that you lost and stop with the excuses.
Now that you have a larger motor than runs on "4 cylinders" now it should be a good race with my car. But if you think that you're going to smash me you're going to have a rude awakening
god damn!!!! my ears hurt! Put some 40 inch resonators on them things. LOL
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
I have a obd1 p29 for sale if anyone wants it for 80. Good luck finding one my g/f looked for one for two years and still never found one. I bought my drag car and it had about 11 ecu in the back of it and one happen to be a p29 lolOriginally Posted by 90_ZC_HATCH
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
wat's a resonatorOriginally Posted by -S Double C-
i love how everyone hates my exhuast
Originally Posted by -S Double C-
Originally Posted by bigdare23
I don't ever recall racing J , unless he can come in and verify that, but hey my memory is shot right now lol... yep you know it because you seen all the blow-by I was giving off homie don't even act lol, well with this so called larger motor it wouldn't not be a good race but merely an anal raping which I wouldn't want to do, but if it makes you feel like more of a man then by all means man
Dammit why did you let me leave without getting my half-shaft from you
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
Originally Posted by EJ1soSlo
So you and jay flying up 75N wasn't a race, coulda fooled me
Plus, you said you pulled jay once we stopped at the gas station to get something to drink.
If we race you got two options, rev to 5k and lose, or rev to 8k and break. Your choice
and that was your 3rd time leaving your damn halfshaft chump!!!
lol it will quiet down your car without hurting your power like a cat would. geez im surprised the glass didnt fall out of the cars when you punched it.Originally Posted by 00CelicaGT
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
Yea I lost, as it was plain to see. You here that everybody, Darryl beat me with his super B16, with pistons that's been soaked in Cheetah blood, so you already know that it's super super quick lol and he was carrying a motor in his hatch. And me with all that blow-by, compression shot to hell and a heavier ohhh wait did that motor bring you up to my weight class or was I still heavier?
Is that a misunderstanding, because I don't understand it LMFAO
you know we homies Darryl
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
Originally Posted by bigdare23
Well no disrespect to Jay or insult, but he lost to a ZC so if that doesn't ring a bell then I don't know what should. So either way both of our motors were not right.
I bet off 2 cyl I could of tried to hang with Alan if not take him lol
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
Originally Posted by EJ1soSlo
such sarcasim
Get it right bitch my pistons was soak in the blood of the road runner!!!
beep beep
Originally Posted by bigdare23
lol wow who needs 8k lol not me, only at a loss of torque does one need longer RPM's lol
Paintless Dent Removal TechnicianCondemnant quod non intellegunt