Quote Originally Posted by EvasiveEF9

While that DOES make sense, I thought HT had done a big research on it and found it to have pushed them out? Was this theory every disproven?
I take the stuff I read on H-T with a grain of salt. On H-T, for instance, you won't find any information, TMK, regarding swapping spindles for a rear disk conversion. I found out on my own that I could do it.

Another thing I found on H-T to be not so true was the information about swapping early seats ( '88-'89 ) into a '90-'91 chassis. The stuff I read claimed that the seat back adjusters can not be installed in the correct position for a '90-'91 car, i.e. with the adjuster on the outside of the seats. My seats are from an '89 Si and the adjusters are on the correct side. I had to swap the seat pans side to side; the '89 passenger seat pan became the driver's side and vice versa.

So, I tend to use H-T as a guide and make adjustments as I see fit to get done what I want to do.