All-motor setup

[bigdare23]

dude stop being a bit.ch and do a dig since your so fast.And if you beat me ill just get my friend to bring his stock b16 back out for you

Please stop homie!

This was what I'm talking about. Get your car DONE, then start making callouts. **** talking is worthless if you dont have anything to drive! Also, get off your homie's nuts. Those tactics are very childlish! Get you car finished FIRST, then run your mouth after your car is PROVEN. When you start draggin people by car lengths run your month how much you want, but until then, you're keep quiet and stop diss'n people.

Don't take this the wrong way, cuz you're cool lil homie, but you talk alot!

Boy you are like a younger version of TANK

[00CelicaGT]

Please stop homie!

This was what I'm talking about. Get your car DONE, then start making callouts. **** talking is worthless if you dont have anything to drive! Also, get off your homie's nuts. Those tactics are very childlish! Get you car finished FIRST, then run your mouth after your car is PROVEN. When you start draggin people by car lengths run your month how much you want, but until then, you're keep quiet and stop diss'n people.

Don't take this the wrong way, cuz you're cool lil homie, but you talk alot!

Boy you are like a younger version of TANK

x2

u and kevin keep going back and forth about who is going to drag who, but u dont have an engine in ur car yet so... it's pointless to argue about who is going to win, it's kinda like the special olympics. it doesn't matter who wins cuz at the end of the day they are all still retards.

so like dare said... finish ur car, beat some people who are actually fast not the mexican's in riverdale w/ a Dseries running on 3 cyl. then u can talk sh1t, cuz it never looks good when u talk a bunch of **** while building and u either get walked by everthing or blow ur sh1t sky high when it does come out the garage.

[sakasaku]

The way your talking I dont think that is a wise decision.If you dont know I would recommend you going to somewhere they will do it correct.

i no how to doit it just first honda and still dont no all the combonations of interchangable

[southside]

Please stop homie!

This was what I'm talking about. Get your car DONE, then start making callouts. **** talking is worthless if you dont have anything to drive! Also, get off your homie's nuts. Those tactics are very childlish! Get you car finished FIRST, then run your mouth after your car is PROVEN. When you start draggin people by car lengths run your month how much you want, but until then, you're keep quiet and stop diss'n people.

Don't take this the wrong way, cuz you're cool lil homie, but you talk alot!

Boy you are like a younger version of TANK

Man Dare I think you need to read,if you noticed Kevin tried to talk about him putting buses on me.So before you try to put me in my place you need to spread the place putting.

[southside]

i no how to doit it just first honda and still dont no all the combonations of interchangable

Ok well if you got questions ask because if you dont ask then you might mess up.And I wouldnt want to see after a whole build somthing messes up because somthing small.

[southside]

x2

u and kevin keep going back and forth about who is going to drag who, but u dont have an engine in ur car yet so... it's pointless to argue about who is going to win, it's kinda like the special olympics. it doesn't matter who wins cuz at the end of the day they are all still retards.

so like dare said... finish ur car, beat some people who are actually fast not the mexican's in riverdale w/ a Dseries running on 3 cyl. then u can talk sh1t, cuz it never looks good when u talk a bunch of **** while building and u either get walked by everthing or blow ur sh1t sky high when it does come out the garage.

What you know about Mexicans in Riverdale. They usually end up blowing they shi.t up.Mostly all of them are spraying damn spray .I dont know but I have noticed i've been talking alot of junk maybe its because I havent had my car running in so long. I just dont like how he trying to diss ls if he doesnt like it then keep it to yourself.You dont have to come out of nowhere trying to diss.

[bigdare23]

Man Dare I think you need to read,if you noticed Kevin tried to talk about him putting buses on me.So before you try to put me in my place you need to spread the place putting.

See the thing is Kevin's car is proven, so I can't really say anything to him. (just search through some of his old threads and watch his videos).


Plus, I expect him to put buses on you (from a roll) and if he doesn't I'm clowning him!

[bigdare23]

Anyways, get your car together so you can ride out

[sakasaku]

Ok well if you got questions ask because if you dont ask then you might mess up.And I wouldnt want to see after a whole build somthing messes up because somthing small.

thanx i appreciate the help

[southside]

Well I dont do rolls anyways so. I guess he already won then.

[southside]

Hopefully when your done we can let the two ls's go at it

[southside]

Anyways, get your car together so you can ride out

Man im looking forward to just riding to Qt and getting gas.Lol which I will proble be disappointed when I see gas prices.

[AnTi-PooN]

CTR pistons are too much compression in an LS. B16 pistons are actually the better choice.

i have ctr pistons in mine

i <3 them

[jfrolang]

my friend had ctr pistons in his ls and etc., It ran pretty wild only problem was he had a slight tap.He ran 13.9 with that setup in a Da with ls tranny.I wonder whos got the highest hp N/A Ls in GA.

Even with a 3-layer head gasket and no head or block machining, CTR pistons in an LS will put the compression above 13:1, too high for most street cars.

[jfrolang]

You definitely want to keep the LS crank too, there's no reason to put a B16 crank in a B18 block unless you're trying to build a B16B type screamer.

There is one OEM crank that offers more stroke than an LS, it's the B21A crank from 3rd gen Preludes, but I probably wouldn't do that without a sleeved block (high lateral cylinder forces at higher RPM).

[00CelicaGT]

What you know about Mexicans in Riverdale. They usually end up blowing they shi.t up.Mostly all of them are spraying damn spray .I dont know but I have noticed i've been talking alot of junk maybe its because I havent had my car running in so long. I just dont like how he trying to diss ls if he doesnt like it then keep it to yourself.You dont have to come out of nowhere trying to diss.

man i live in henry county, but all my friends stay in clay co and i work in jonesboro. so im always riding around the southside. so i know all about the mexican's in riverdale. i used to go to the publix meets every sunday, untill the mexicans went crazy and started shooting each other.

[southside]

man i live in henry county, but all my friends stay in clay co and i work in jonesboro. so im always riding around the southside. so i know all about the mexican's in riverdale. i used to go to the publix meets every sunday, untill the mexicans went crazy and started shooting each other.

I was there when that dude got shot seen it upclose and it was no joke.But the next weekend we went out and couldnt find nobody.I figured ithe people that didnt have anything to do with it would still come out.But to my suprise everyone got scared.But they hangout down here again now its just not like the old days though. Not to many people wanna run

[jfrolang]

Not to [sic] many people wanna run

I think you're infatuated with street racing, there's more to life than having a faster car than the next guy. Anyway, head to a drag strip on a test and tune night, everyone you see will be willing to line up.

[southside]

I think you're infatuated with street racing, there's more to life than having a faster car than the next guy. Anyway, head to a drag strip on a test and tune night, everyone you see will be willing to line up.

WHen did I post that comment Hmmmmmmm

[KevinT707]

Yo SouthSide, I think I'm not going to let you race me until you actually have proven yourself by beating a few ppl like all the B16 guys in the EF Squad but forreal though what did your friend's stock B16 EF run a best of at SDR?

[southside]

Yo SouthSide, I think I'm not going to let you race me until you actually have proven yourself by beating a few ppl like all the B16 guys in the EF Squad but forreal though what did your friend's stock B16 EF run a best of at SDR?

Naw it was a cream colored eg,and his best time was 14.1 that day.

[sakasaku]

You definitely want to keep the LS crank too, there's no reason to put a B16 crank in a B18 block unless you're trying to build a B16B type screamer.

There is one OEM crank that offers more stroke than an LS, it's the B21A crank from 3rd gen Preludes, but I probably wouldn't do that without a sleeved block (high lateral cylinder forces at higher RPM).

i think i might just do the b16 pistons

[AnTi-PooN]

Yo SouthSide, I think I'm not going to let you race me until you actually have proven yourself by beating a few ppl like all the B16 guys in the EF Squad but forreal though what did your friend's stock B16 EF run a best of at SDR?

what if we all 3 line up?

[southside]

what if we all 3 line up?

Ill just let yall go at it

[southside]

what if we all 3 line up?

Ill just let yall go at it

[sakasaku]

okay i am going to just build this motor oem, then once it is running i am going to find a ls block then i can take my time and build the badass motor i want from scratch and do it right! so ill do litlle mods on this motor as i build the the other motor peice by peice. so thats it. turning over a new leaf and lets go!

[southside]

Wise decision I am deciding if I should use this other block I have for what I want to do.

[AnTi-PooN]

^^^^ good idea

[southside]

yea slow but steady

[sakasaku]

yup this next motor is going to be the shat!!!!!!
but this one is so stock.....

[southside]

yup this next motor is going to be the shat!!!!!!
but this one is so stock.....

So how long will it take for you to get it done and running?

[JDMJAYDC2]

i said that so 200 posts ago but who listens to the ice cream guy sheesh!

[southside]

i said that so 200 posts ago but who listens to the ice cream guy sheesh!

haha I heard ya but im like BLOX imma take your idea

[SlamminCRX]

haha, you guys just totally turned buddys thread into a **** talking one lol

anywas man, i advice going with a gsr or b16 head, ls dont make good power all motor.

i almost went the ls way until i realized those ****s are slow, so i have an ls vtec now.

go for it, build it right and its worth it. but if your going ls i have a clean ass vw green ls valve cover ill sell to you.

[southside]

haha, you guys just totally turned buddys thread into a **** talking one lol

anywas man, i advice going with a gsr or b16 head, ls dont make good power all motor.

i almost went the ls way until i realized those ****s are slow, so i have an ls vtec now.

go for it, build it right and its worth it. but if your going ls i have a clean ass vw green ls valve cover ill sell to you.

Yea thats what usually happens on IA