Ok, got the codes.
6 = Water Temp. Sensor
10 = Intake Air Temp. Sensor
14 = Idle Air Control Valve

I want to be sure I did this right, so this is what I did:

I got the code off the actual ECU, not the CEL.
The red light flashed 6 times real fast.
The light cut off for a sec.
Then flashed 10 times fast.
Then another pause.
And then 14 times fast.
(I was expecting 1 long and 4 short, like I read on HT.)
After that it just repeated everything.

Is that right? (I really hate not know this stuff.)