Old Threads

[DynamicSound]

We have been pushing this project due to our workload with customers, but today his sub amps start turning off. For the passed weeks, the sub itself would turn on and off. So we started taking the old system apart. As soon as we start to pull panels, we see what is lurking behind it.

The wires are tangled together, not ran behind panels, pinched in 2 places, and cheap fuse block. The battery is not bolted down and is sliding all over. The terminals are loose on the battery due to this. The fuseblock is also not bolted down and is sliding everywhere. Also, the battery was suppose to be mounted in the wheel well per the owner's instructions, but instead is laying behind the enclosures. They wrapped cheap wood with suede to use for the floorboard. It was torn up after placing the enclosures in the trunk, so they covered it with another sheet od suede. Just simply laid it on top. On top of this, the fiberglass enclosures where very thin and simply pressing on them would make them crack. Not to mention, they used a battery that is for 600 watt systems and the RMS of these 3 amps is around 2400 watts.

Here are some photos...