~~ EM2 cluster in a 99 EK project ~~

[Rage]

I now have the EM2 gauge cluster plugs and as full set of EK cluster plugs. I will have a write up on the difference in the two sets of plugs and how to depin both types of plugs. Im taking pics of how to do it now and should have them up tomorrow. Keep an eye out tomorrow afternoon for a new update...

[Rage]

I been busy but Im taking time to add a quick post here on a few things I have found out. The plugs in the 01 up Civic's have changed a lot. There are only two plugs now (blue and green) where as the 2000 and old Civic have four to five plugs. I have some pictures here that will show the difference. To put an EM2 cluster into an EK you HAVE to have the EM2 cluster plugs. I have found out a lot more but will have to post more when I have time.


Here are the EM2 plugs:











Here is pretty much what the EK will look like. These plugs came out of an automatic.





There is a big difference in the two sets of plugs. At this time it looks like I may have to cut and solder the EM2 plugs to the EK wire harness. Nothing to really worry about. This can be done. Just have to make sure the wires are matched up. I am verifying all of the pin outs now. My cluster should be here today and I will post pics some time tommorrow when I get some time.

Thanks!!