you knoe you want a wire tuck!:..

[.:Stirfry:.]

if any of you DA guys want your engine bay to be lookin sessy, or just simply less cluttered. i can do it, but for a price that it.. for the low..
gotta have no ac or ps but i can work around that..

[chelezookie]

what if a da girl wants one....

[Sir_Christopher]

i have a wiring nightare... h22 ef...eww

[.:Stirfry:.]

what if a da girl wants one....

hhmmm . then that da girl wont have to ask me twice,
if she wants it ill give it to her..
(lots of nonhomo/)

[.:Stirfry:.]

i have a wiring nightare... h22 ef...eww

then i can fix that nightmare..

btw one of the first ive seen w/ a h22 in a ef w/o having to cut the hood or use hood spacers.

[chelezookie]

hhmmm . then that da girl wont have to ask me twice,
if she wants it ill give it to her..
(lots of nonhomo/)

mwahahaha! i like.

[jadakid88]

bump for sterling

[ls-r teg]

price?

[03RCode]

KNOW*

[.:Stirfry:.]

$210.(ten is for gas b/c i come to you). and you supply me with the 4g for your battery, enough to where every you want to put it.. everything else i include

[.:Stirfry:.]

this is just one ex. i did ..

[.:Stirfry:.]

bump for sterling

thx cortland

[jcs]

Attachment 202424















a little something me and sterlin did.....which reminds me pm me son

[.:Stirfry:.]

well damn that looks 242342x better cleaned.. lol

[FAM0U5]

will you do a supra clean up?

[.:Stirfry:.]

I can... but i will just need a pic of your engine bay to take a look of what im working with..

[FAM0U5]

I can... but i will just need a pic of your engine bay to take a look of what im working with..

Ill PM you

[.:Stirfry:.]

Ill PM you

[jcs]

i knows......i did a little more that day.....injectors and purple power that som biotch

[.:Stirfry:.]

and i will do it for any other car out there too, just lmk what you have.

[.:Stirfry:.]

heres a lil tuck i did on my DA a while back. (abs ftl).

[SlenderEG6]

i remember that

[volk_ef9]

nice work. looks very good.

[chelezookie]

cheap as balls for a wire tuck.
i'ma keep that in mind. ;]

[.:Stirfry:.]

ddooooooo it.

[hurlyfire7]

if i wasnt soo poor id get ya to tuck my bay in a second.. o well, ill try it myself and eventually figure it out, taking the ac compressor/lines out tmrw

[.:Stirfry:.]

if i wasnt soo poor id get ya to tuck my bay in a second.. o well, ill try it myself and eventually figure it out, taking the ac compressor/lines out tmrw

thx. but if you have any question on it lmk

[calboi]

wheres them pics man

[hurlyfire7]

i will, one of my hoses exploded yesterday somehow... believe its a radiator hose cuz my temp gauge is goin craaazy... where do you usually hide the wires and what not? is there a certain place youd go for?

[.:Stirfry:.]

i will, one of my hoses exploded yesterday somehow... believe its a radiator hose cuz my temp gauge is goin craaazy... where do you usually hide the wires and what not? is there a certain place youd go for?

i start of by pullin off the fenders and bumpers and then start deloomin all the old wire looms and the old electrical tape and pull all the wires behind the firewall. on the driver side theres a lil hole that is pluged up with a little ruber plug (next to the sunroof drain hose if you have a sunroof) pull all the headlight wires though there. and your gunna need to extend thoses two wire comming from the mastercylinder. then if you have a resistor box i usually mount that behind the firewall as well to. or under the intake mani. on the pass. side i mount the fuse box up and behind the glove box or you can just do it right on top of the ecu. and do the same for the headlight wires.

but since DAs and EFs maps are located on the outside firewall it gets a bit more complicated and i will have to use pics for that..

i hope that helps out a bit ..

i will do an actual write up next time i do one.

[FAM0U5]

i start of by pullin off the fenders and bumpers and then start deloomin all the old wire looms and the old electrical tape and pull all the wires behind the firewall. on the driver side theres a lil hole that is pluged up with a little ruber plug (next to the sunroof drain hose if you have a sunroof) pull all the headlight wires though there. and your gunna need to extend thoses two wire comming from the mastercylinder. then if you have a resistor box i usually mount that behind the firewall as well to. or under the intake mani. on the pass. side i mount the fuse box up and behind the glove box or you can just do it right on top of the ecu. and do the same for the headlight wires.

but since DAs and EFs maps are located on the outside firewall it gets a bit more complicated and i will have to use pics for that..

i hope that helps out a bit ..

i will do an actual write up next time i do one.

don't do it... it's your money maker lol

[.:Stirfry:.]

don't do it... it's your money maker lol

lol.. i knoe thats why i didnt really want to go all into details.. and even if i did they would be like WTF hell naw. im callin .:Stirfry:. to do it..
lol

[FAM0U5]

lol.. i knoe thats why i didnt really want to go all into details.. and even if i did they would be like WTF hell naw. im callin .:Stirfry:. to do it..
lol

or make it seem soo hard that they have to call you lol

ex: vac hose runs west towards till it meets piller B then post to run south to find "X"

[.:Stirfry:.]

or make it seem soo hard that they have to call you lol

ex: vac hose runs west towards till it meets piller B then post to run south to find "X"

lol. yea or i can really say how it is..

trace the red/y & b/w wire thats leading into the y/b one back into the dash thats bysecting with the a7 of the ecu plug and section 4 of the engine to dash harness connector. de pin it from the ecu and repin it to c17 and move it to section 2 instead, so now you have to more the y/blk from the engine harness into the 1,3,4,5 of the resitsor plug, then the y wire from the mass air temp switch into 2, then rewire the blk/b dot from b7 into the mass air switch...................etc..
lol

[FAM0U5]

lol. yea or i can really say how it is..

trace the red/y & b/w wire thats leading into the y/b one back into the dash thats bysecting with the a7 of the ecu plug and section 4 of the engine to dash harness connector. de pin it from the ecu and repin it to c17 and move it to section 2 instead, so now you have to more the y/blk from the engine harness into the 1,3,4,5 of the resitsor plug, then the y wire from the mass air temp switch into 2, then rewire the blk/b dot from b7 into the mass air switch...................etc..
lol

I swear it's like he's trying to talk to me...

[PURP]

not trying to start anything or knock you for what you're doing... but this is not tucked.



Like I said, I'm not in here to start anything. And the price you said is great. I'm just wanting to offer my knowledge on things if you'd like to accept. Feel free to PM me anytime. I enjoy helping others when I can.

DISCLAIMER: I'm not hating, starting things, or saying I'm better. I know you know what you're doing. But I just see room for improvement and I am just offering my services.

[jcs]

does this get the seal of approval mr purp,i took the time to tuck some extra things

[.:Stirfry:.]

not trying to start anything or knock you for what you're doing... but this is not tucked.

Like I said, I'm not in here to start anything. And the price you said is great. I'm just wanting to offer my knowledge on things if you'd like to accept. Feel free to PM me anytime. I enjoy helping others when I can.

DISCLAIMER: I'm not hating, starting things, or saying I'm better. I know you know what you're doing. But I just see room for improvement and I am just offering my services.

these tucks are just lil mild tucks. now i knoe and can do a full tuck.
these are manily just hidin the fuse box, battery and headlight wires.

and also these were done with out pulling the dash, taking off the engine harness, pullin the motor, the mater cylinder, or flipin the break booster. and heat are still in these cars as will.
and its only done in a short amount of time (4-5 hrs)..
thats why it cheap.

but if someone wants a full complete tuck on their honda. i can do that as will but for a price..

the only thing i havent done yet and have any experience in, is a brake line tuck.. i havent done that by myself yet.

[jcs]

^i want one on my car but i dont know what its gonna cost....my dad has all the tools to do it though(plumber)if you ever want to try one sterling

[xdavidscenex]

sterling, i need a full tuck on my 67 falcon.