Nice.
Nice.
TDC Performance
Mobile, AL
MOAR PICS ! !
--looking good, man. --looking good.
its come pretty far!! nice job
~DB4LYFE
07 Honda GD3
nice keep it goin
wordOriginally Posted by GSRteg®
I much appreciate it folks for all the positive feekback:.
&& i will have much much more this weekend..
but juss a few for now..
- i got all the wires all tied up, the fenders back on, side mirror, the hood (but for some reason that joker will not close all the way back down but ill get it) & the headlights. welded up the brackets for the fmic & mounted it:.
Volt guage mounted on the rear bumper, && im going to mount some jumper terminals on there also:..
fmic mounted,.. and test fitting the bumper:. & i still have to do a bit more trimming tho:.
notice the cute little bov
ATL DAsquad Member #9
sry for the bad pics
ATL DAsquad Member #9
Beautiful ...i wish i never sold my DA..:[.
i still dont know how you got it back in shape. lol that thing was far from being back on the road. and let me emphasize FAR. lol
lol.. yea. haha. you and Dominique said it wouldnt be back on the road again.. well.......... it will be this weekend. no bsOriginally Posted by DeeAOne
i think im juss that damn good, you think so? i think so
and how bout that wiring huh?
ATL DAsquad Member #9
i didnt say anything....LOL.Originally Posted by Malakas luob
ill believe it when i see it.
Originally Posted by DeeAOne
iight iight. lol
juss be over there this weekend, and none of
that i gotta work BS.
ATL DAsquad Member #9
i might have to..Originally Posted by Malakas luob
lol
you man you..Originally Posted by DeeAOne
lol.
why you always be quitin out on us man.. wth
ATL DAsquad Member #9
i got money to make. cant drive the ranger forever. 1st gear is almost completely gone. i have to get out of it while i can before it shits on me. lolOriginally Posted by Malakas luob
update:..
shes back to the house:
well im just still piecing her back together && im starting to cut and weld up my charge piping (2 1/2 intake side the rest is 2 1/4)..
more pics.
got the hatch on.
dont worry the bumper is just hanging like that for now:..
GrEeenn..
the custom charge piping all tacked up, still not finished w/ it..
so pretty ..
. got all my oil lines and fittings.
and here is all my ic piping and exhaust piping.
&&
im going 2 1/2 off the turbo srt8 back into a 3'' glasspack .
ATL DAsquad Member #9
looks great mann
hatch is heavy isnt it? lol it took my little ass all my strength to get it up on the da1.
more pics up in a few:..
ATL DAsquad Member #9
Here are few more updates from this past week and weekend. One of the first things i did was to decide to clean out the inside of the car. You knoe trash, brokin glass, vacuum all that good stuff.
Then bolt down the dash, cluster and put all the pannels back on. While doing that i put the little clutch switch on the pannel where my steering wheel is. so all i gotta do is push the little button to start it.
Wired up a kill switch, fan, and another little nifty switch thats required to be on while starting it. .
I relocated my battery to the back. && I have a battery box for it, but ill do that later.
&& i got my custom log mani, that i got made by a friend of mine:..
the volt guage & im going to put on some jumper terminals above it.
idk
red needles.
got bored.
started to make block off plates. im just using that as a mock up for the real one.
ATL DAsquad Member #9
the Mani..
drilled and taped a vac. nozzel on the housing.
and the head and IM is for sale if anyone needs one:..
since this turbo came off a 300zx. the 5 bolt t25 ex flange does not fit, b/c this t25 uses a 4 bolt ex flange. I might do some custom sh!t to make this one work.
ATL DAsquad Member #9
ATL DAsquad Member #9
nice
Soon!!
nice pics:::
selling your exhaust system
yep i sure am:.. $250 is the price..Originally Posted by laokid
its an HKS HiPower
ATL DAsquad Member #9
Originally Posted by 93db2
thx guys:..Originally Posted by puregroove
ATL DAsquad Member #9
:..
ATL DAsquad Member #9
Yep! with my camera...hahaOriginally Posted by puregroove
Originally Posted by JDMBrian
ATL DAsquad Member #9
damn this is a good build
thanx man
ATL DAsquad Member #9
more update pics up in a bit.
got the mani and turbo mouted, along with the oil feed & block fitting.
and i tapped oil pan and welded it up and put the oil drain hose on.
all is left is to make my IC piping.
ATL DAsquad Member #9
wait im probably missing a bunch but are you parting out the car now..
DA SQUAD # 13
lol.. yea you are, but naw im not. im gunna keep the car and finish the build..
ATL DAsquad Member #9
:..
ATL DAsquad Member #9
I stole Mr. Malakas Luob's vacuum line. I needed it for my car. Muhahahaha...
But my brother is almost done with the charge piping.
i finaly finished up my charge piping.
A hell of a lot of cutting, measuring, tacking, and welding.. but its all done
now i just have to do the same w/ my down pipe.
and the welds may not be the prettiest but they work for me, && im going to grind them down smooth them out and wrap all of the charge piping in blk heat wrap..
and welded a flange on my glasspack
ATL DAsquad Member #9