:Stirfrys:. V2.0 DA9 build

Nice.

MOAR PICS ! !

--looking good, man. --looking good.

its come pretty far!! nice job

~DB4LYFE

nice keep it goin

More :camera:

Quote:

---

Originally Posted by GSRteg®

More :camera:

---

word:goodjob:

I much appreciate it folks for all the positive feekback:. :yes: :D

&& i will have much much more this weekend.. :camera:

but juss a few for now..

- i got all the wires all tied up, the fenders back on, side mirror, the hood (but for some reason that joker will not close all the way back down :2up: but ill get it) & the headlights. welded up the brackets for the fmic & mounted it:.

http://i246.photobucket.com/albums/g...a/newda153.jpg

Volt guage mounted on the rear bumper, && im going to mount some jumper terminals on there also:..

http://i246.photobucket.com/albums/g...a/newda152.jpg

fmic mounted,.. and test fitting the bumper:. & i still have to do a bit more trimming tho:.
notice the cute little bov :D

http://i246.photobucket.com/albums/g...a/newda155.jpg

sry for the bad pics

Beautiful :D...i wish i never sold my DA..:[.

i still dont know how you got it back in shape. lol that thing was far from being back on the road. and let me emphasize FAR. lol

Quote:

---

Originally Posted by DeeAOne

i still dont know how you got it back in shape. lol that thing was far from being back on the road. and let me emphasize FAR. lol

---

lol.. yea.:2up: haha. you and Dominique said it wouldnt be back on the road again.. well.......... it will be this weekend. no bs
i think im juss that damn good, you think so? i think so :D

and how bout that wiring huh?:tongue1:

Quote:

---

Originally Posted by Malakas luob

lol.. yea.:2up: haha. you and Dominique said it wouldnt be back on the road again.. well.......... it will be this weekend. no bs
i think im juss that damn good, you think so? i think so :D

and how bout that wiring huh?:tongue1:

---

i didnt say anything....:ninja::lmfao:LOL.

ill believe it when i see it. :rolleyes:

Quote:

---

Originally Posted by DeeAOne

i didnt say anything....:ninja::lmfao:LOL.

ill believe it when i see it. :rolleyes:

---

iight iight. lol
juss be over there this weekend, and none of
that i gotta work BS.

Quote:

---

Originally Posted by Malakas luob

iight iight. lol
juss be over there this weekend, and none of
that i gotta work BS.

---

i might have to..














:ninja: lol

Quote:

---

Originally Posted by DeeAOne

i might have to..

---

:2up: you man :2up: you..

lol.

why you always be quitin out on us man.. wth

Quote:

---

Originally Posted by Malakas luob

:2up: you man :2up: you..

lol.

why you always be quitin out on us man.. wth

---

i got money to make. cant drive the ranger forever. 1st gear is almost completely gone. i have to get out of it while i can before it shits on me. lol

update:..
shes back to the house: :D
well im just still piecing her back together && im starting to cut and weld up my charge piping (2 1/2 intake side the rest is 2 1/4)..

more pics. :camera:

got the hatch on.


http://i246.photobucket.com/albums/g...wpics002-1.jpg

http://i246.photobucket.com/albums/g...wpics003-1.jpg

dont worry the bumper is just hanging like that for now:..

http://i246.photobucket.com/albums/g...newpics013.jpg

http://i246.photobucket.com/albums/g...newpics014.jpg

http://i246.photobucket.com/albums/g...newpics010.jpg

http://i246.photobucket.com/albums/g...newpics011.jpg

GrEeenn..

http://i246.photobucket.com/albums/g...newpics009.jpg

the custom charge piping all tacked up, still not finished w/ it..

http://i246.photobucket.com/albums/g...newpics008.jpg

http://i246.photobucket.com/albums/g...newpics007.jpg

so pretty :D ..

http://i246.photobucket.com/albums/g...newpics006.jpg

http://i246.photobucket.com/albums/g...newpics005.jpg

http://i246.photobucket.com/albums/g...newpics001.jpg

. got all my oil lines and fittings.

http://i246.photobucket.com/albums/g...newpics018.jpg

and here is all my ic piping and exhaust piping.

&&
im going 2 1/2 off the turbo srt8 back into a 3'' glasspack :goodjob: .

http://i246.photobucket.com/albums/g...newpics015.jpg

http://i246.photobucket.com/albums/g...newpics016.jpg

http://i246.photobucket.com/albums/g...newpics017.jpg

looks great mann

hatch is heavy isnt it? lol it took my little ass all my strength to get it up on the da1.

more pics up in a few:.. :camera: :yes:

Here are few more updates from this past week and weekend. One of the first things i did was to decide to clean out the inside of the car. You knoe trash, brokin glass, vacuum all that good stuff.
Then bolt down the dash, cluster and put all the pannels back on. While doing that i put the little clutch switch on the pannel where my steering wheel is. so all i gotta do is push the little button to start it.
Wired up a kill switch, fan, and another little nifty switch thats required to be on while starting it. :ninja: .
I relocated my battery to the back. && I have a battery box for it, but ill do that later.

&& i got my custom log mani, that i got made by a friend of mine:..

:camera: :camera:

the volt guage & im going to put on some jumper terminals above it.

http://i246.photobucket.com/albums/g...wpics001-1.jpg

http://i246.photobucket.com/albums/g...newpics003.jpg

http://i246.photobucket.com/albums/g...wpics004-1.jpg

http://i246.photobucket.com/albums/g...wpics005-1.jpg

idk :thinking:

http://i246.photobucket.com/albums/g...wpics006-1.jpg

http://i246.photobucket.com/albums/g...wpics007-1.jpg

red needles.

http://i246.photobucket.com/albums/g...wpics008-1.jpg

got bored.

http://i246.photobucket.com/albums/g...wpics009-1.jpg


http://i246.photobucket.com/albums/g...wpics015-1.jpg

started to make block off plates. im just using that as a mock up for the real one.

http://i246.photobucket.com/albums/g...wpics010-1.jpg

http://i246.photobucket.com/albums/g...wpics011-1.jpg

:D

http://i246.photobucket.com/albums/g...wpics013-1.jpg

http://i246.photobucket.com/albums/g...wpics014-1.jpg

the Mani..

http://i246.photobucket.com/albums/g...newpics022.jpg

http://i246.photobucket.com/albums/g...wpics019-1.jpg

http://i246.photobucket.com/albums/g...wpics021-1.jpg

drilled and taped a vac. nozzel on the housing.

http://i246.photobucket.com/albums/g...wpics016-1.jpg

http://i246.photobucket.com/albums/g...wpics018-1.jpg

http://i246.photobucket.com/albums/g...wpics025-1.jpg

and the head and IM is for sale if anyone needs one:..

http://i246.photobucket.com/albums/g...wpics027-1.jpg

http://i246.photobucket.com/albums/g...newpics024.jpg

http://i246.photobucket.com/albums/g...newpics023.jpg

since this turbo came off a 300zx. the 5 bolt t25 ex flange does not fit, b/c this t25 uses a 4 bolt ex flange. I might do some custom sh!t to make this one work.

http://i246.photobucket.com/albums/g...wpics028-1.jpg

http://i246.photobucket.com/albums/g...wpics017-1.jpg

nice

:goodjob: nice pics:::

selling your exhaust system

Quote:

---

Originally Posted by laokid

selling your exhaust system

---

yep i sure am:.. $250 is the price..

its an HKS HiPower

Quote:

---

Originally Posted by 93db2

nice

---

Quote:

---

Originally Posted by puregroove

:goodjob: nice pics:::

---

thx guys:.. :yes: :goodjob:

:bannana: :..

Quote:

---

Originally Posted by puregroove

:goodjob: nice pics:::

---

Yep! with my camera...haha

Quote:

---

Originally Posted by JDMBrian

Yep! with my camera...haha

---

:tongue1:

damn this is a good build

thanx man :goodjob:

more update pics up in a bit.
got the mani and turbo mouted, along with the oil feed & block fitting.
and i tapped oil pan and welded it up and put the oil drain hose on.


all is left is to make my IC piping.:D

wait im probably missing a bunch but are you parting out the car now..

lol.. yea you are, but naw im not. im gunna keep the car and finish the build..

:camera: :..


http://i246.photobucket.com/albums/g...rbomani002.jpg

http://i246.photobucket.com/albums/g...rbomani007.jpg

http://i246.photobucket.com/albums/g...rbomani003.jpg

http://i246.photobucket.com/albums/g...rbomani005.jpg

I stole Mr. Malakas Luob's vacuum line. I needed it for my car. Muhahahaha...
But my brother is almost done with the charge piping.

i finaly finished up my charge piping.
A hell of a lot of cutting, measuring, tacking, and welding.. but its all done
now i just have to do the same w/ my down pipe.

and the welds may not be the prettiest but they work for me, && im going to grind them down smooth them out and wrap all of the charge piping in blk heat wrap..

http://i246.photobucket.com/albums/g...epiping007.jpg

http://i246.photobucket.com/albums/g...epiping006.jpg

http://i246.photobucket.com/albums/g...epiping005.jpg

http://i246.photobucket.com/albums/g...epiping004.jpg


http://i246.photobucket.com/albums/g...epiping003.jpg

http://i246.photobucket.com/albums/g...epiping002.jpg

http://i246.photobucket.com/albums/g...epiping001.jpg

and welded a flange on my glasspack

http://i246.photobucket.com/albums/g...epiping008.jpg