Post future plans with your cars here
Now that we have our own digitty dog thread (thanks Autumn) I thought it would be a good idea to start a modding thread.
I'll start.
I would like to upgrade my turbo system to a T3 billet BB 6262 S cover .82 A/R turbine housing or maybe a T4 TS 4094, with the use of air to air FMIC assisting an Air to water intercooler. With of course Meth, that I already have. Looking for a soft and easy 500 awhp on stock bottom end. Maybe a little more seeing that I drive her so little
ok i would like to finish my new project and get all my shit put together, boosting enough to make 550+whp...i already i have a t3/t4 57 trim..wanting a gt35r ....hoping to get it tuned and dialed before next big event
I'm going to set mine on fire and collect insurance fraud money... that's just how I roll... lolol
Originally Posted by PURP
i think i did that to one of my hot wheels cars once......minus the insurance claim. 8)
I hear you can only get away with it once
Single Turbo, haven't decided which one yet maybe around a 50 trim.. i don't want too much hp or i would kill myself. TQ convertor of course, because the stall is set too low. The stock auto tranny can only hold around 350hp, and i'm looking for around 450-550. Maybe some weight reduction so it's not such a fat pig.
But if anything happens to my engine, fuck it, i'm going to a GTE setup with upgraded turbos.
people are making fun of me, but i want a fucking hello kitty exhaust...
btw, this is all when i get a job, and don't have to spend thousands for school every year...fml.
http://www.youtube.com/watch?v=wEKLx...layer_embedded
response from 03RCode: Hell, it turns me on. I have a steel hard erection as speak
"Who Gives a Fuck" Crew Member #5
suspension parts mostly...for now.
blox rear lca, omni front lcas. bigger rear sway bar(maybe 24mm). carbing front sway bar (havent decided which one). i want my car to handle well before i make it go fast. lol.
Last edited by 99jdmLs; 07-23-2009 at 07:34 PM.
1. Finish my turbo setup
2. Get some new suspension
3. Teg master cylinder and booster and rear discs
I have a master fro a DC
Sell mine and then get something new... Then sell it and get something new.... Then I am going to sell it and get something new.
selling my civic coupe and painting my del sol. Then i plan on getting kicked off the track after the first good pass in my civic hatch cause i refuse to get a roll cage
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
I go some JDM 1 piece headlights if you interested???? 275 plus your stock ones. (if there okay)selling my civic coupe and painting my del sol. Then i plan on getting kicked off the track after the first good pass in my civic hatch cause i refuse to get a roll cage
there imaculate but im keeping them only thing my del sol is getting is fresh paint cause the dings in it annoy me.I go some JDM 1 piece headlights if you interested???? 275 plus your stock ones. (if there okay)
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
2.05 valve aluminum heads, 150 plate shot, and start saving for my tub kit.. still debating on doing a 13' rear tire, or full pro street big ass tires.
maybe a new steering wheel vtec head or just a turbo setup
ray
turbo that bitch
and some racing seats
The '03: Drive it and rice it out a little more. If I can buy the parts car I'm looking at I'll be doing an MTX swap and starting a turbo build this fall. If not, drive it whenever.
The '98: Install short shifter and straighten out a couple small things. Right now I let my dad daily it, but I'll probably take it back to school with me.
1993 240SX single cam
First off i'm rebuilding my turbo due to leaking seals. Then ill prolly get a dump tube made and a new downpipe to clean things up ALOT. lol And i also need a new ballast so ill prolly jus get some new hid's......Oh, and prolly a muffler. Thats bout it considering ive only had this car for two days. lol
change of plans.....lol.
b20 block, stock crank. arp rod bolts. eagle rods(mayb, idk if i want to use them). high comp pistons
gsr head, mild P&P, some cams.
and ill call it a day. i have half of it(block and head)
I can get you a good price on a bottom end setup!!!
Looks like I'll be installing my electric cut out this weekend, and my meth injection. When I get my tatrix cable back from johnboy (WANTED) I'll tap dance around to tuning it.
Jacob, if you have any questions, jus' ask. Sorry to hear about your recent failure
trust me bro, keep your phone handy. you will be called. lol....you know where i live, feel more than welcome to drop by.
Preeshate it bro, You should swing by Richards Saturday. We'll be tuckin, shavin, paintin, and swappin.
.......Busy Dayyyy. lol
more boost, sleeves, Jordana Brewster in the back seat.
+1000
ive been hearing about this black 240 just waiiting to see carl run you in the neonmore boost, sleeves, Jordana Brewster in the back seat.
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
racing
well mines down for a few weeks . have to change the plugs they on back orderive been hearing about this black 240 just waiiting to see carl run you in the neon
it will be out in a few weeks ..
theres a white one that will race u at the track in that 240 i will talk to him see if he can come out one night this weekend ..............got two kids and two in the belly,,, he loves the trackphenix city
i'll be back out in a couple weeks. 240 needs to be tuned but cash flow is tight. Would have came out in my DD tonight, but it seemed like it was gonna be rainy.ive been hearing about this black 240 just waiiting to see carl run you in the neon
hearing how slow it is?
never said it wasnt just said i wanted to see how quick it was 2 years ago i had the 2 baddest 240's in town and yes thats plural but i moved back to the dark side and my hondas where my knowlegde is best!
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
i cant exit out of this thread!!!! dayum jordana is HOT!.
Now that we have our own digitty dog thread (thanks Autumn) I thought it would be a good idea to start a modding thread.
I'll start.
I would like to upgrade my turbo system to a T3 billet BB 6262 S cover .82 A/R turbine housing or maybe a T4 TS 4094, with the use of air to air FMIC assisting an Air to water intercooler. With of course Meth, that I already have. Looking for a soft and easy 500 awhp on stock bottom end. Maybe a little more seeing that I drive her so little
Will be updating with pics as soon as the ish arrives
I will be getting piston rings to reraise my compression.
Id be more than happy to perform that service sir
that service now have to wait for james, lol........
I would like to install my 6k HIDs....if Nitro ever sends them
28 . female . I has VTEC . hondachik .
S.I.C. Chic (Split Image Customs II)
OH NOZ YOU GOT HIDS from Nitro... Hope you get a good set.I would like to install my 6k HIDs....if Nitro ever sends them
I asked for a refund...Ima try to go through Dynamic Sound on here
28 . female . I has VTEC . hondachik .
S.I.C. Chic (Split Image Customs II)
Full drivetrain swap on the 81 corolla , with QA-1 coilovers in the rear and ground controlcoilovers up front. with a custom brembo brake setup all the way around.
a spec front lip
tein rear struts to go with my front
paint job
then a set of wheels. 8)
Posting Permissions
Reply With Quote
