<<<Official Columbus, GA Discussion Thread>>>

[ash7]

So....I need my fenders rolled/shaved gents. Who in Columbus can do it? My rims are too wide for my car!!! Ugggghh, FML....

Are you looking for a freebie, or for skilled/paid labor? I can do the latter of the two options.

-jonathan

[ultm8mind]

Oh so you're the man on the fender rolling huh? Text me what you wanna charge homo, since it's like that, lol.

[justnprsh07]

all according how hard they got to be rolled and how good of quality you want... if just they just need to have the lip rolled then johnathan has a fender roller but if they need to be really rolled and flared then hit me up

[six7teen]

ive seen jon flare fenders too

[ultm8mind]

I wouldn't mind a pull but I think I may just need them shaved/rolled pretty much flat. I don't have a bunch of money I can dedicate to this right now basically.

[ultm8mind]

But I want my stuff done right without issue or paint falling off, lol

[justnprsh07]

well my suggestion is try just rolling them with the fender roller and if its not enough or it cracks the paint then do it how u want it...

[clumsy_smurf]

yea ive seen johns work on this, did a good job. i tried askin to get mine done but blade said he had the roller? also whens import showdown?

[boosted347]

yea ive seen johns work on this, did a good job. i tried askin to get mine done but blade said he had the roller? also whens import showdown?

November 12th

[ash7]

well my suggestion is try just rolling them with the fender roller and if its not enough or it cracks the paint then do it how u want it...

agreed. Baby steps and minimal modification are the way to go.

yea ive seen johns work on this, did a good job. i tried askin to get mine done but blade said he had the roller?

Thanks man. I got tired of the fender rolling drama and sold my Max roller to Blade a couple months ago - i'm certain i can acquire it for work if necessary.

I'll hit you up tomorrow, Brucie.
-jonathan

[six7teen]

jon! you dead man? text me!

[ash7]

jon! you dead man? text me!

-jonathan

[clumsy_smurf]

aye np. btw got my car running alot better. had to buy a basemap but getting it tuned very soon, then motor swap

[six7teen]

i bet you guys didnt know this but apparently you can sell s2k seats for $1700!!!

[clumsy_smurf]

ha talking bout bryant? i was beside him when yall were txtin...ive seen them go for that to be honest..but idk bout anymore..maybe 600-800?

[six7teen]

not even bro.. i sold my near perfect recaro srd's for $700, and had a hard time doing that.. now i wasn't trying to "lowball" him (which i dont know why he thinks i did since i didnt even give him a price), so i thought his little immature response was quite childish.. but i was just informing him that his price was way high.. most sets that are sold here on IA go for $300 at most...

personally, i wouldnt give more than $100 for s2k seats for my sol. (1) they dont fit. (2) leather sucks in georgia. (3) they arent comfortable...

and even more than that, i wouldnt give bryant $25 for his seats.. he is the worst "salesman" i have ever dealt with in my life. i have wasted enough of my time and money on him for me to ever do business with him again... i figured i might entertain his offer since i havent talked to the kid in months.. but he hasnt changed a bit..

[99jdmLs]

Only way you can get 7-800(mint) is if they are red/black leather ap2 seats. that is lowball on them, i have seen some sell got 13-1400 before. ap1 seats like ben said, 1-200 depending on condition. you can prob get a 300-400 for ap2 seats.

[clumsy_smurf]

Very true Ben. I hang with the kid but will never buy, sell, or let him come close to touching my car

[ultm8mind]

....still waiting on Jon's text. Import Showdown at Reynolds on the 12th? Is there an "end of the year" meet in Atlanta like Import Alliance? I thought they had one last year....

[six7teen]

Very true Ben. I hang with the kid but will never buy, sell, or let him come close to touching my car

amen.. sorry if it sounded like i was jumping down your throat

[-S Double C-]

November 12th

didnt know is was that close might bring one the bikes out there i havent ran the 1/4 in a min.

[nycclaye]

anyone need a K20 radiator? I swapped out my stock one and don't need it anymore. It's a denso and it's up for $100.

[clumsy_smurf]

Oh nah man no harm done lol.

[six7teen]

so i found out tonight that my Si-R was converted because it only has four lugs per wheel..........................................





















thanks for the info columbus

[ultm8mind]

Hey Ben your Si-R is converted.

[six7teen]

but on the plus side.. its a DANG good conversion?? they even got factory welds, and put little jdm stickers on the gas tank under the car and everything ... i guess it doesnt matter though.. im just a poser

[noridetoolow]

How certain are you of this Ben? I just found another JDM Si-R and its 4 lug as well. I honestly cant see someone adding JDM decals to a gas tank, thats a bit over kill granted the USDM model could very well have Jap decals anyway but im just thinking out loud.

Done more looking....cannot find any Sol in a 5 lug ( not specifically looking for 5 lug though ) but every SiR I find is 4 lug, here is a good example;
http://exchange.goo-net.com/usedcars...110703010.html

so i found out tonight that my Si-R was converted because it only has four lugs per wheel..........................................


thanks for the info columbus

[six7teen]

haha, i was absolutely being facetious... del sol Si-R came in the 4x100.. the 5 lug pattern was ITR and CTR.. i was merely mocking the locals! thanks for looking out though bro

[noridetoolow]

LOL ok, wanted to be sure you had not been provided with eronious info! I knew the ITR and CTR was and assumed after your post the SIR as well but just didnt seem to make much sense considering all the finer details your car has that would have had to have been made as well!

[ultm8mind]

Ben, you're car is still a conversion. The facts stated above are irrelevant, lol.... and the fact that you're Rich's brother doesn't help.

[99jdmLs]

Ben, you're car is still a conversion. The facts stated above are irrelevant, lol.... and the fact that you're Rich's brother doesn't help.

its not 5 lug so its not real.....the fact that hes my brother is also irrelevant. lol

[ultm8mind]

its not 5 lug so its not real.....the fact that hes my brother is also irrelevant. lol

On the contrary, it's definitely relevant.

[six7teen]

relevancy is irrelevant!! my car is whatever i say it is!

[99jdmLs]

On the contrary, it's definitely relevant.

the only thing that is relevant is the fact that is everything is irrelevant and bruce never makes any sense.....


bens car is converted bc his spare tire is orange and the tire has japanese writing.......oh wait.

[six7teen]

mmhmm

[ultm8mind]

the only thing that is relevant is the fact that is everything is irrelevant and bruce never makes any sense.....


bens car is converted bc his spare tire is orange and the tire has japanese writing.......oh wait.

hmmm, damn son.....it's like that? LOL, ok, I guess at times I tend to be in my own little world. But it's okay they know me here.

[willard]

so anyone know were i can get an ef shell?

[LIKEG6]

What you want an ef shell for sir?

[ultm8mind]

there's one in the for sale section....

[SoLJames95]

not even bro.. i sold my near perfect recaro srd's for $700, and had a hard time doing that.. now i wasn't trying to "lowball" him (which i dont know why he thinks i did since i didnt even give him a price), so i thought his little immature response was quite childish.. but i was just informing him that his price was way high.. most sets that are sold here on IA go for $300 at most...

personally, i wouldnt give more than $100 for s2k seats for my sol. (1) they dont fit. (2) leather sucks in georgia. (3) they arent comfortable...

and even more than that, i wouldnt give bryant $25 for his seats.. he is the worst "salesman" i have ever dealt with in my life. i have wasted enough of my time and money on him for me to ever do business with him again... i figured i might entertain his offer since i havent talked to the kid in months.. but he hasnt changed a bit..

Come on now, i figure Rich would chime in. S2k seats fit, -1 bolt. You have to do little modification, me and rich did it on mine. one took 2 hrs the other 20-30 min. lol after we found what to do, surprisingly from my bro. Also 300 is the average, but if you lookin for the peanut butter ones. they still go for 5-7 ap1 or not. Also look on s2ki for good deals. and i think they are comfortable, but everyones has different butt/posture.