If it's in alpharetta we can get it next day. We get stuff on saturday's too sometimes. Gotta get there before three though to order somethin.
If it's in alpharetta we can get it next day. We get stuff on saturday's too sometimes. Gotta get there before three though to order somethin.
if your reffering to the bracket that holds the ac compressor, its a lil more than 40. lol....
does it have 4 bolts that go into it that holds it to the block? andone bolt out of the side that is torque mount on the drivers side? -if so, order it before 4pm tom and ill have it saturday morning by 7. (technically it gets here at midnight but i sure wont be here then)
I was referring to the idler wheel assembly, and the tensioner arm - not the bracket.Originally Posted by 99jdmLs
Sean, if you're talking about the bracket assembly for an LS - there's two cars at Bama that have them.
-jonathan
[/URL]
Jesus Christ is my Savior
hahaha, ah gotcha. ya- that arm is around $30 without the wheel. ......that friggn bracket new is around $100, list price.
junk yards can be your friend sometimes but nothing beats shiny new parts from acura. 8)
so does anyone know anything bout converting obd0 to obd1 completely.
EHHHHHHHHHHH If you boost a d-series you will average 185-210 pending on turbo/tune. A stock B-series will not get you these numbers.
But I dont know how you were comparing them when it came to power addons.
But the biggest thing to me when it comes to D VS B! Is long run maintence.
D- parts to B series parts are 80% cheaper.
EX. SI tranny for d series(good condition)75-175$.... B SeriesPending on tranny. (300-600)
Long Blocks D ($50-200) B (3-800)
Also Ive seen some sick turbo/stock turbo setups wax b turbo setups.
ill go check tomorrow i just left bama tuesday pulling the entire ac system off a DB7 down there lol and it sliped my mind to get that pulley or search for one. they only charged 50 for everything i needed the ac harness,condenser,evaporator and all the lines i was shocked!I was referring to the idler wheel assembly, and the tensioner arm - not the bracket.
Sean, if you're talking about the bracket assembly for an LS - there's two cars at Bama that have them.
-jonathan
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
good grief.....thats beyond cheap! what were they smoking? lol.....and what year was that db7?
any efs/das?????
UglyEF what do you mean completely? I converted mine with the jumper harness, ecu and dizzy harness. It's pretty easy.
Well I have an OBD0 harness in my dash and under the hood. i was going to swap out the harness under the hood for the OBD0 Vtec harness
but when i ordered it they sent me an OBD1 Vtec harness. So now I am stuck at what to do about the wiring. Since I am stuck with the harness I was wondering what would be my best options to get Vtec running. Should I wire the Vtec in myself with the OBD0 harness, wire in the OBD1 harness into my OBD0 harness under the hood, or gut the OBD0 wiring from the dash and swap everything over to OBD1?
What would be the best road to take, and the cleanest? Im also down for some extra suggestion. lol
The obd1 is probably going to have a diff. plug for the alternator(not positive,I know obd2 is diff), and maybe some other things. I would say just wire up vtec and use the OBD0 harness. It's only a couple wires. Lol
Then just get the jumper harnesses.
Or you can just cut any plugs that are different off the obd1 and splice in the obd0 ones. I know the wires for the tps are swapped from obd0 to obd1. Just have to de-pin it and swap it or else there will be no full throttle.
ok well i have the conversion harness an i have also added MPFI to my OBD0 just have no vtec and since it seems like you have already done an OBD0 to an OBD1 conversion you thank you can help me!!
"Well at Honda..." That's all I got to say!
94-97 and james im not sure i went to get what i needed and got the hell out took me 25 mins to get the whole ac system out pay and leave lol
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
Hahahahahahaha Yall all go to hell...lol
I sure can dude. Just get my number from Ricky Bobby.
ay trell i need a b16 dizzy
I CANT HELP IT'S FYE
Jacob before you're done lemme check the torque on all your bolts.
k will do so are you availaible tomorrow..
I work everyday from 8-6 and this saturday from 8-5. So this weekend isn't looking too good lol.
k cool well let me know when your availiable cause im getting it back on the road tomorrow just won't have vtec!!
Haha ok will do. Probably after work sometime next week.
so whats sup for this weekend where is everyone gonna chill or hangout. i've been back in alabama for 3 months an haven't seen shit an hopefully have my car back up an running so i wanna hangout somewhere but dont know where.
who is 99jdmLs and why are you giving me bad rep
prolly the normal places like britt an shell
they still at britt LOL
yup
95 hatch gsr05 neon SRT4 project
almost done
new toy
progress
night bishes
Cash > Merit
Pacification through Force
Morning bishes
Hahahaha true, cause yall have all them special tools for each bolt on the car. Lol
And Teymur has them torque arms so yall could both have at it. Lol
hahahahahahahahaha
-jonathan
Jesus Christ is my Savior
i need help wiring up my vtec . got the ecu and wiring harness but the wiring harness in side my car is non vtec and cory post it in the wtt and wtb thread
i am 99jdmls, 8) and i gave you bad rep? lol...very interested.
here you go, should be able to use this picture to wire it correctly.
-jonathan
Jesus Christ is my Savior
Hell, who uses a torque wrench these days. I use the impact on all my bolts, from oil pan all the way up to valve cover. I usually finger tighten my lug nuts, crank bolt, and axle nuts.
not interesting i even looked at the post that you gave me bad rep an it had nothing to do with you. you wasnt even in the conversation lol. so im lost.
when an where i'll help
ya, ment interesting....i don't even remember you to be honest bro. what post?
#249 on paige 13 of the WTB/WTT SECTION this is what it said lol.
and sean i was just tryin to see if u lie about what u got like u use to cuz i know everything u got to...lol...i still remember back when u had that del slow and that ugly DA Teg
Posting Permissions
Reply With Quote
