Results 1 to 30 of 30

Thread: Got_Purp/Shane94

Hybrid View

  1. #1
    GoooooooooooN shane94's Avatar
    Join Date
    Sep 2007
    Location
    Gainesville/Oakwood/Flower Branch
    Age
    37
    Posts
    1,158
    Rep Power
    22

    Default

    Quote Originally Posted by 03RCode
    Hey hey hey... Kevo...










    Your -ish needs to be sitting planet Earth.



    Sweet pics, Shanes EG is slick.
    im glad that you like the camber, i just lifted the car up alittle bit before he took the pic's, it was on the ground!!!!

  2. #2
    Grocery Getter GetFRESH!'s Avatar
    Join Date
    May 2007
    Location
    Columbus
    Age
    42
    Posts
    469
    Rep Power
    20

    Default

    Cream hatch has WAY too much unnecessary camber.

    Just because you have the ability to run -6357 degrees of negative camber doesn't mean you should. I mean I can understand pulling it in so it's flush but that's ridiculous. If you want that much camber, get a wider/lower offset wheel. Other than that, get that front bumper situation straightened out and snap in them fender mouldings it'll be

    THOROUGHLY loving your car as usual Purp. My only beef is that your muffler looks slightly tilted downwards and that bugs me. lol. Good shit though man. Glad you got all the bugs worked out finally.

  3. #3
    PURP-a-trader PURP's Avatar
    Join Date
    Feb 2008
    Posts
    13,880
    Rep Power
    46

    Default

    Quote Originally Posted by GetFRESH!
    THOROUGHLY loving your car as usual Purp. My only beef is that your muffler looks slightly tilted downwards and that bugs me. lol. Good shit though man. Glad you got all the bugs worked out finally.
    yeah, the muffler is a lil to long to run it out normal... but it sounds so good(like a Subaru... I love it) so, I don't want to mess with it...lolol.. I'll eventually get it fixed, one day. Just not anytime soon. I have to get the whole exhaust redone, anyways...I appreciate it, man. Just trying to do me..
    Quote Originally Posted by PURP View Post
    A g00n... is a real life thing. It walks, talks, and shits. A goblin is a fictional character that isn't real life. It's FAKE..... like rotas, y0. Hope that helps.

  4. #4
    GoooooooooooN shane94's Avatar
    Join Date
    Sep 2007
    Location
    Gainesville/Oakwood/Flower Branch
    Age
    37
    Posts
    1,158
    Rep Power
    22

    Default

    Quote Originally Posted by GetFRESH!
    Cream hatch has WAY too much unnecessary camber.

    Just because you have the ability to run -6357 degrees of negative camber doesn't mean you should. I mean I can understand pulling it in so it's flush but that's ridiculous. If you want that much camber, get a wider/lower offset wheel. Other than that, get that front bumper situation straightened out and snap in them fender mouldings it'll be

    THOROUGHLY loving your car as usual Purp. My only beef is that your muffler looks slightly tilted downwards and that bugs me. lol. Good shit though man. Glad you got all the bugs worked out finally.

    im already running a set of 15x8 +15 offset on the car!!!!! And I really dont care what other people thank, its my car and i look at it as if they are hating then there mad becouse they dont have a stance like me!!!!! I mean a Mercedes-Benz AMG doesn't even have a stance like me!!!! Just ask Purp
    Last edited by shane94; 06-28-2009 at 02:09 AM.

  5. #5
    Grocery Getter GetFRESH!'s Avatar
    Join Date
    May 2007
    Location
    Columbus
    Age
    42
    Posts
    469
    Rep Power
    20

    Default

    ^man... I don't think you got what I was saying at all.

    I wasn't "hating" on your "stanize" or whatever. I happen to be a real big fan of the stanced low offset look. And I wasn't telling you to go out and get wider wheels, I was just saying that amount of negative camber in the rear far exceeds what I would consider necessary to make those wheels fit. You could take out at least 1 1/2 to 2 degrees of camber and still have the proper tire/fender clearance. I mean, isn't the whole reason behind getting wide/low offset wheels to get rid of that nasty sunken ship look that their high offset counterparts give? I dunno man maybe I'm missing something but I'm just not getting why you would max out the camber kit when you don't have to?

  6. #6
    GoooooooooooN shane94's Avatar
    Join Date
    Sep 2007
    Location
    Gainesville/Oakwood/Flower Branch
    Age
    37
    Posts
    1,158
    Rep Power
    22

    Default

    Quote Originally Posted by GetFRESH!
    ^man... I don't think you got what I was saying at all.

    I wasn't "hating" on your "stanize" or whatever. I happen to be a real big fan of the stanced low offset look. And I wasn't telling you to go out and get wider wheels, I was just saying that amount of negative camber in the rear far exceeds what I would consider necessary to make those wheels fit. You could take out at least 1 1/2 to 2 degrees of camber and still have the proper tire/fender clearance. I mean, isn't the whole reason behind getting wide/low offset wheels to get rid of that nasty sunken ship look that their high offset counterparts give? I dunno man maybe I'm missing something but I'm just not getting why you would max out the camber kit when you don't have to?
    my bad man, i though you were being a A$$ H@le!!!! I just took it the wrong way!!!!!

    I did the camber like that, becouse i just like the way it look's from the rear and i dont see any car's riding around with the camber like that around where i live..... im just trying to be different then every eg hatch.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!