it is just mounted but i will weld in -16 an fittings and stainless lines for it






seat

BOV sponsored by xs-power

head studs main studs and rod bolts

inter cooler piping couplers tbolt clamps and V-band exhaust clamp fot the down pipe on turbo

and the microtech ltx12s 45psi map sensed!


motive gears 4.10 to be precise

some new axles from moser that includes green high perf. bearings and 5/8 race studs kit.






the rearend housing painted and ready to go in!


the front coilover suspension ready and installed! ( by the way it came up super nice and smooth)



in this picture i want to tell that the car is on the air on jackstands so it got to look sick when i lay it down in the floor!



and the rear bumper installed, i made custom brackets for it and it really pays off it is just beautiful!



here is the intake half done it need to be welded from the outside of the runners, smooth out the runners, the back plenum cover the front one with the TB flange, and the fuel rail! sounds a lot but it is less than what i have done on it already !check it out!





chek what i was talking about with the weld taking the place of the velocitys!


rear end + suspension setup!




brake pump installed just waiting on the line lock to hook it up!