FS:Type-R Cable Tranny, GSR block, Crower rods, and more

[johnzm]

tranny wasnt for me anyway, way way too short for my setup, but whatever thats cool. Your not going to find anywhere on here to sell it to, 800 for a cable tranny lol.

iheared your setup made like 160whp LOL

remember i made 190whp with a ITR with a header on it hahaha

oh well mine was making 170 and it wasnt even tuned. that means that YES u can take advantage of it and YES your cars going to be slow without it.
have a nice day, and GTFO of here if u dont have anything ncie to say.


*edit* have fun with your 160whp 2 liter monster..

[jackdaripper]

iheared your setup made like 160whp LOL

remember i made 190whp with a ITR with a header on it hahaha

oh well mine was making 170 and it wasnt even tuned. that means that YES u can take advantage of it and YES your cars going to be slow without it.
have a nice day, and GTFO of here if u dont have anything ncie to say.


*edit* have fun with your 160whp 2 liter monster..

Wow your dumber then I thought, my motor isnt even in the car yet, and I have a ys1 tranny sitting right here Im waiting on my lsd. My roommates car however dynoed 169, not mine. I was trying to sell your tranny for you but oh well. Scotty can tell ya what mine makes in two weeks when it gets tuned, hell I might even change my mind and have him tune it there just to rub it in your face. A 4.7 final drive tranny would be way to short for MY setup, considering Im probly gonna be spraying in the 200 range.

[Vteckidd]

and he will not sell this tranny for less than $800. FIRM MEANS FIRM, this tranny cant be built for less than $1500, YS1 OPEN DIFF CABLE TRANNYS FROM HMOTORSONLINE ARE GOING FOR $800, buy a $300 ITR diff, and a $350-400 4.78FD, you got yourself this trans.

This tranny was inspected by STEVE at HMOTORSONLINE.COM himself, and the tranny was flawless, Joey At racewerks built it and reinspected it TWICE.

bump

[scarecrow26]

bump for the toda flywheel

[Vteckidd]

Ill talk to my friend and see if he wil ltake your offer.

[johnzm]

also got a fully assmbeled (with all electronics) AEBS IM for b16 wth
ITR TB
B&M regulator
fuel rail
obd0 b series injectors
IAC
TPS
MAP
everything is on it
and 200 OBO

also
B series mount kit for EF will come with the B series rear braket as well.
and urethane bushings in the shift linkage too.


hub bearing for EK/EF/EG/DC
50 bux new in box.

hydro kevlar clutch--1KS (good for about 200whp)
150 with many many many miles left. also fits on YS1

the clutch and flywheel were balanced


scarecrow26- i am not 100% sure i want to ship anythign yet. let me think about it over the weekend.


oh ya slicks
3 or 4 passes on them, motor blew before i could get the nitrous on. these are sized with the trans gearing in mind. for people that cannot do math as you increase your tire size you must decrease your final drive to keep your tight gearing, or your going to be running large slicks and making your gears very, very long
these are 24.5's witht he 4.78 FD and the YS1 gearing hit about 120mph with a 9500rpm rev in fourth. perfect for that mid-low 11 sec nitrous or n/a car. boosted will needa little more gear.
they are on a 13x8 panasport lookalike, created by rota specifically to clear the larger brakes of a DC/EK. the wheels are in new condition and the tires are as well, and come with tubes to prevent any issue should a blowout occur, and will help keep the air in at those ultra low pressures
wheels+tires=600 and will not seperate..

[BTEC]

john call me asap dude

[scarecrow26]

if i offer more cash to ship will you then? i need it asap. i'm going to redo my b16 tranny and want to install this at the same time. pm me or email. thanks

[tubby]

bump 4 u

[scarecrow26]

flywheel and clutch are mine !!

[Vteckidd]

bump