FS:Type-R Cable Tranny, GSR block, Crower rods, and more

**Vteckidd** · 02-15-2006, 01:15 PM

1) YS1 cable GSR tranny with JDM 4.78 FD and ITR LSD.
This is the PIMPEST tranny you can buy got cable cars (EF). it has the same gearset as the JDM ITR tranny, and it uses hydro gears so its basically a CABLE ITR TRANS.

PERFECT tranny, belongs to my best friend, driven it plenty of times. EXTREMELY short geared tranny. He ran 13.3 in a crx with a STOCK gsr motor and this built tranny.

$800 FIRM for the tranny alone, $1000 with a Action 1ks KEVLAR clutch

2) SOLD
3) Crower BILLET GSR connecting rods
less than 1000 miles on them. Balanced and checked by the local machine shop. These are the $800 rods from crower
$400 obo

4) HASPORT B series Mount kit EF and HASPORT Shift Linkage
billet with urethane inserts. Perfect shape
$350 obo

**1civic** · 02-15-2006, 01:26 PM

Pm sent..

**speedminded** · 02-15-2006, 01:31 PM

lol, i was like WTF?!!! ITR cable tranny?! Sounds sweet, hopefully will be picking up an ITR tranny for my car soon

**mccoy1178** · 02-15-2006, 03:00 PM

JDM Bare GSR block with mains $100
-no crank
-no rods or pistons, great for sleeving
BLOCK CODE:5874690

is this good for rebuilding? has it been bore or anything. i wanna take my guts out my gsr andput it into this one when i do a rebuild. lmk thanx
Mccoy

**drtyhatch** · 02-15-2006, 07:49 PM

pm sent, help me out brutha.

**boostboy97** · 02-15-2006, 10:19 PM

you better get the vin# on that trans or the MODS will delete your post

**speedminded** · 02-16-2006, 10:16 AM

Originally Posted by boostboy97

you better get the vin# on that trans or the MODS will delete your post

Originally Posted by vteckidd

Tranny was BOUGHT from Hmotorsonline. Its a JDM YS1 tranny. Came off a XSI i beleive. My friend (johnzm) installed a ITR LSD and a ITR JDM 4.78 FD. he had all the bearings and synchros rebuilt.

There is no vin number on JDM cars, since no VIN number for this tranny.

lol, do cable tranny's even have VIN's?

**BTEC** · 02-16-2006, 10:22 AM

Originally Posted by speedminded

lol, do cable tranny's even have VIN's?

yeah, ys1, s20, and all that other bull. well it sounded good ne way.

**len** · 02-16-2006, 10:33 AM

The block is mine.=p

Mike call me back at my work number. I want to put a 1.8L Engine in the back of my Bimmer. =) Two engines = better than one!

**BTEC** · 02-16-2006, 10:35 AM

Originally Posted by len

The block is mine.=p

Mike call me back at my work number. I want to put a 1.8L Engine in the back of my Bimmer. =) Two engines = better than one!

i stole that shit lastnight dude. ur SOL!!! I think mike is gonna be a little peturbed when he realizes it. lol!!!!

ok i lied.

**speedminded** · 02-16-2006, 10:35 AM

Originally Posted by len

The block is mine.=p

Mike call me back at my work number. I want to put a 1.8L Engine in the back of my Bimmer. =) Two engines = better than one!

lol, i have a feeling the Kraut gods will look down on you for that.

**Vteckidd** · 02-16-2006, 10:51 AM

Originally Posted by len

The block is mine.=p

Mike call me back at my work number. I want to put a 1.8L Engine in the back of my Bimmer. =) Two engines = better than one!

LEN! whats up buddy, CALL JOHNZM hes got 3 blocks, the one ine this thread is pending sale.

**drtyhatch** · 02-15-2006, 10:32 PM

he is a mod, lol, yeah thats right you better start following your own rules mike.

**Mitch_M** · 02-15-2006, 10:39 PM

Where do I have to go to pick up the block.
I will come get it tomorrow.
Thanks.....

**UpSideDownDesi** · 02-16-2006, 01:15 AM

who was the previous owner of the tranny....before your friend?

**Vteckidd** · 02-16-2006, 10:01 AM

Tranny was BOUGHT from Hmotorsonline. Its a JDM YS1 tranny. Came off a XSI i beleive. My friend (johnzm) installed a ITR LSD and a ITR JDM 4.78 FD. he had all the bearings and synchros rebuilt.

There is no vin number on JDM cars, since no VIN number for this tranny.

**Vteckidd** · 02-16-2006, 10:52 AM

GSR BLOCK PENDING SALE

hes got 2 more, but i think they are complete, if you guys are interested.

**IntegraXTR** · 02-16-2006, 04:10 PM

Originally Posted by vteckidd

GSR BLOCK PENDING SALE

hes got 2 more, but i think they are complete, if you guys are interested.

very interested!!!!!!! PM me with details

**Vteckidd** · 02-16-2006, 10:58 AM

SPEEDMINDED, Joey at Racewerks did all the work to this trans about a year an a half ago, if you were around then

**speedminded** · 02-16-2006, 11:14 AM

Originally Posted by vteckidd

SPEEDMINDED, Joey at Racewerks did all the work to this trans about a year an a half ago, if you were around then

ohh yeah, i think I remember it...just saw Joey a little over a week ago. i've been crewing for Sam for like 3 years now and work there every day i can get off. You know Joey hasn't been there for several months now right?

**johnzm** · 02-16-2006, 02:13 PM

this transmission WAS built entirely by raceworks, and i have reciepts that can go with the trans for proof of that.

it has the 4.78, which was bought new, from Hmotorsonline, and a ITR/CTR lsd which was bought new on EBAY.

BTW i dunno if mike put it in here,
if u get the clutch (which is basically new, less than 5000 miles, and the kevlar material is known for NEVER wearing out) for 100 more i will throw in the toda flywheel with it. the clutch and flywheel have both been balanced.

or i have a toda flywheel for sale for 150, seperatly

**Vteckidd** · 02-16-2006, 02:27 PM

great deals

TODA B series flywheel $100

**speedminded** · 02-16-2006, 02:43 PM

Originally Posted by vteckidd

great deals

TODA B series flywheel $100

what's the weight? a little under 9.0lbs like the cusco maybe? it is one piece "chromoly" right?

**johnzm** · 02-16-2006, 02:53 PM

no they are 12 i believe. yes 1 piece not aluminum. if we todd was up id show a pic. it is in perfect shape.

and mike 150 seperate man! read my post u whore

100 with the whole tranny setup

funny part is that clutch was over 400 dollars its a sweet daily driver clutch for any car under 210whp i hate to see it go, except that ive bought the exact same clutch for my next project haha

**speedminded** · 02-16-2006, 02:59 PM

Originally Posted by johnzm

no they are 12 i believe. yes 1 piece not aluminum. if we todd was up id show a pic. it is in perfect shape.

and mike 150 seperate man! read my post u whore

100 with the whole tranny setup

funny part is that clutch was over 400 dollars its a sweet daily driver clutch for any car under 210whp i hate to see it go, except that ive bought the exact same clutch for my next project haha

nm, we've got the stock gs-r machined and balanced down to 12 safely...i got my 1 piece Cusco 8.75lb for $200...eBay

*bump for Toda*

**HatchedGTI** · 02-17-2006, 12:55 AM

Bare Block *Sold*... picked it up today

**Vteckidd** · 02-17-2006, 10:54 AM

BUMP

Originally Posted by vteckidd

1) YS1 cable GSR tranny with JDM 4.78 FD and ITR LSD.
This is the PIMPEST tranny you can buy got cable cars (EF). it has the same gearset as the JDM ITR tranny, and it uses hydro gears so its basically a CABLE ITR TRANS.

PERFECT tranny, belongs to my best friend, driven it plenty of times. EXTREMELY short geared tranny. He ran 13.3 in a crx with a STOCK gsr motor and this built tranny.

$800 FIRM for the tranny alone, $1000 with a Action 1ks KEVLAR clutch

2) SOLD
3) Crower BILLET GSR connecting rods
less than 1000 miles on them. Balanced and checked by the local machine shop. These are the $800 rods from crower
$400 obo

4) HASPORT B series Mount kit EF and HASPORT Shift Linkage
billet with urethane inserts. Perfect shape
$350 obo

5) TODA B series balnced flywheel
$100 FIRM

**1civic** · 02-17-2006, 12:12 PM

Damn Mike We were just there to get that Block, What 2days ago....So much for contacting us...

...What happen to first come first serve..Later..

**Vteckidd** · 02-17-2006, 12:24 PM

my friend sold it to someone else. this isnt my stuff

**1civic** · 02-17-2006, 12:27 PM

Originally Posted by vteckidd

my friend sold it to someone else. this isnt my stuff

Thats cool..You did say he had another one correct...If so Hit me up and I'll get it..

**johnzm** · 02-17-2006, 04:35 PM

i got 2 man. what are u looking for in a motor LOL
ones waitintg to be assembled, and ones assembled with a bad piston which will be replaced very soon.

**1civic** · 02-17-2006, 04:38 PM

Just need a bare block...

**jackdaripper** · 02-17-2006, 10:44 PM

I have 700 for the tranny

**Vteckidd** · 02-18-2006, 11:51 AM

Originally Posted by jackdaripper

I have 700 for the tranny

no offense man, but given your past history with john, he wont sell it to you. especially since you never settled up with him for past money owed.

not trying to start anything , just being honest.

and he will not sell this tranny for less than $800. FIRM MEANS FIRM, this tranny cant be built for less than $1500, YS1 OPEN DIFF CABLE TRANNYS FROM HMOTORSONLINE ARE GOING FOR $800, buy a $300 ITR diff, and a $350-400 4.78FD, you got yourself this trans.

This tranny was inspected by STEVE at HMOTORSONLINE.COM himself, and the tranny was flawless, Joey At racewerks built it and reinspected it TWICE.

I vouch.

BUMP

**4DRGSR** · 02-17-2006, 10:49 PM

do you still have the flywheel...if so can i arrange a pickup from augusta next week.....

**punkr6** · 02-17-2006, 10:56 PM

hhl

**Mitch_M** · 02-18-2006, 01:23 AM

hey johnzm, len at baranco told me you might have a bare gsr block, if so I need it asap, please pm me when you read this,,,,
Thanks

**jackdaripper** · 02-18-2006, 12:47 PM

tranny wasnt for me anyway, way way too short for my setup, but whatever thats cool. Your not going to find anywhere on here to sell it to, 800 for a cable tranny lol.

**johnzm** · 02-18-2006, 01:20 PM

Originally Posted by jackdaripper

tranny wasnt for me anyway, way way too short for my setup, but whatever thats cool. Your not going to find anywhere on here to sell it to, 800 for a cable tranny lol.

iheared your setup made like 160whp LOL

remember i made 190whp with a ITR with a header on it hahaha

oh well mine was making 170 and it wasnt even tuned. that means that YES u can take advantage of it and YES your cars going to be slow without it.
have a nice day, and GTFO of here if u dont have anything ncie to say.

*edit* have fun with your 160whp 2 liter monster..

**jackdaripper** · 02-18-2006, 05:37 PM

Originally Posted by johnzm

iheared your setup made like 160whp LOL

remember i made 190whp with a ITR with a header on it hahaha

oh well mine was making 170 and it wasnt even tuned. that means that YES u can take advantage of it and YES your cars going to be slow without it.
have a nice day, and GTFO of here if u dont have anything ncie to say.

*edit* have fun with your 160whp 2 liter monster..

Wow your dumber then I thought, my motor isnt even in the car yet, and I have a ys1 tranny sitting right here Im waiting on my lsd. My roommates car however dynoed 169, not mine. I was trying to sell your tranny for you but oh well. Scotty can tell ya what mine makes in two weeks when it gets tuned, hell I might even change my mind and have him tune it there just to rub it in your face. A 4.7 final drive tranny would be way to short for MY setup, considering Im probly gonna be spraying in the 200 range.

Thread: FS:Type-R Cable Tranny, GSR block, Crower rods, and more

Thread Tools

Display

Hybrid View

FS:Type-R Cable Tranny, GSR block, Crower rods, and more

Posting Permissions

About us

Announcement