sounds like the amp is going into protection mode, use a meter and check the ohm at each voice coil and see if one of the voice coils is blown which might be cause'n improper ohm load which is causing the amp to go into protection. Also check the gains, lower it a little and see if you still get the same problem at the same volume level at which it cuts off at. Also you dont wanna have the gain turn to max on the amp that just asking for distortion which can cause nothing but problems. Just because the subs can handle more then whatthe amp puts on RMS, doesnt mean you should have teh gain on teh amp on MAX, that more then likely the problem
Reply With Quote