My modest non-VTEC build. 56k, consider yourself warned...

**BABY J** · 04-14-2006, 06:43 PM

LOL

**Vteckidd** · 05-01-2006, 02:35 PM

**99SI** · 05-01-2006, 03:05 PM

Those are the nicest looking jack stands I've ever seen in that last pic. Whoever bought those must have been an idiot, cuz I bet they cost a lot of money. lol.

**BABY J** · 05-01-2006, 03:07 PM

Originally Posted by 99SI

Those are the nicest looking jack stands I've ever seen in that last pic. Whoever bought those must have been an idiot, cuz I bet they cost a lot of money. lol.

Sig-worthy. You are hereby immortalized by Baby J --> make a speech bitch, but keep it short.

**99SI** · 05-01-2006, 03:36 PM

I would like to thank Baby J and all the other little people who I am able to entertain with my quick wit and sharp tongue. It is nice to finally be recognized for all the hard work and dedication I have put in to be a smart ass, smart mouth bastard. Thank you all. :BOWS:

We were giving Mike shit about his jack and jack stands when I took my motor up to him. lol. He's very proud and defensive of his shiny blue aluminum snap on jack and matching jack stands.

**BABY J** · 05-01-2006, 03:41 PM

^^ LOL> We should all chip in and get him an authentic Honda Service Techincian shirt and a bottle of Loctite-Mike.

**Vteckidd** · 05-01-2006, 03:47 PM

hell yeah my snap on blue point jack an jack stands cost alot.

nthing like paying $40 a week for shit

**99SI** · 05-01-2006, 04:09 PM

Financing-The American Way! Getting in debt is your best bet!

**BABY J** · 05-01-2006, 04:14 PM

Originally Posted by vteckidd

hell yeah my snap on blue point jack an jack stands cost alot.

nthing like paying $40 a week for shit

You're laughing, but I paid for my EG motor that way. I dropped $400 a week for 8 or 9 weeks. I was lucky enough to use a shop that knew I was good for it (www.pfi-speed.com) . Plus I guess if I defaulted all they had to to was request the title from the state of CO under the vehicle abandoment laws. Good times, good times. I have also bought a few cars like that.

**99SI** · 05-02-2006, 10:21 AM

I SELL USED CARS AND DO IN HOUSE FINANCING. I, ABOVE ANYONE, TRULY BELIEVE WHAT I TYPED. LOL. HOW DO YOU THINK I BUILT MY MOTOR BEFORE AND HOW I'M BUILDING IT AGAIN.

DEBT FTW!

**Vteckidd** · 05-09-2006, 09:00 AM

So you want 600whp, AC, PS, AND a gt35R with a topmount??? No problem

**BABY J** · 05-09-2006, 09:31 AM

That's hott Mike. I think that's the conversation that me and you have above anything lse... me not wanting to lose PS/AC. I mean I can do w/out PS, but I gotta have AC man... when I was in Colorado it was like who cares... but I gotta have it here in GA. Good stuff!!!! Is that SPOOLINS motor?

**Vteckidd** · 05-09-2006, 09:32 AM

thats daniels

**SPOOLIN** · 05-09-2006, 10:23 AM

shit naw, VTAAK FO LYFE

although in ms spoolins setup, it will be a turbo built LS non VTAAK, but not 600whp.

**v8killr** · 05-14-2006, 10:30 AM

nice...

**iloveboost** · 05-15-2006, 10:35 AM

Thanks. Should be done tomorrow.

**Vteckidd** · 05-15-2006, 11:55 AM

**iloveboost** · 05-15-2006, 01:01 PM

That's what I call a manifold.

Hats off to Main Stream and Turbo Dave. The best thing since peanut butter and jelly. =P

**BABY J** · 05-15-2006, 01:07 PM

Originally Posted by iloveboost

That's what I call a manifold.

Hats off to Main Stream and Turbo Dave. The best thing since peanut butter and jelly. =P

Skippy? Peter Pan? or Jif?

**iloveboost** · 05-15-2006, 02:45 PM

Jif. Creamy though. Crunchy sucks.

**Vteckidd** · 05-17-2006, 04:23 PM

ON THE DYNO AS WE SPEAK

excuse the mess, we have been really busy :P

**Jdm94Coupe** · 05-17-2006, 05:04 PM

bout god damn time, LOL JK....... waiting for #'s...... GOOD LUCK!!

shit looks sick in the car..... too clean

**Kevykev** · 05-17-2006, 05:43 PM

Damn yo

**BABY J** · 05-17-2006, 08:54 PM

So SPOOLIN spec'd out this build, or did he just assemble the motor to some1 else's specs?

**NAIZBST** · 05-17-2006, 09:05 PM

how did you fit the down pipe past the slave cylinder mike?

**Vteckidd** · 05-17-2006, 09:06 PM

spoolin has NOTHING to do with this build LOL

Block was built by Golden Eagle Manufacturing
Longblock was assembled by us
Manifold was made by us

**BABY J** · 05-17-2006, 09:11 PM

Originally Posted by vteckidd

spoolin has NOTHING to do with this build LOL

I was tryna find a post where SPOOLIN said "do not blame for that snail selection, I did not choose that"... I thought that was this build. My bad.

**Vteckidd** · 05-17-2006, 10:35 PM

UPDATE

405whp@14psi power still climbing

**SPOOLIN** · 05-17-2006, 11:08 PM

lol, i was talking about the black civic si that was/is up there, not this car. GEM built the short block for this integra. haha.

anyways, 14 psi and 400 hp is the hot fire. i made 470 at 20 psi.
wish i had a ball bearing cartridge.

**Vteckidd** · 05-17-2006, 11:33 PM

Ok here it is:

PUMP GAS that is at least 3 months old, 4th gear pull, 19psi (by the boost controller)
Graph in MPH

Graph in RPM

It lost signal midway on the RPM graph, but its still there. with only a few miles on it and the old pump gas on it, we opted to call it a night to be safe. Im gonna start a new thread on it

**silviadriftr** · 05-18-2006, 12:12 AM

I think he will have that grin on his face for a good week!!!!! LOL!!! Great number s, now drive it like you stole it......

**SPOOLIN** · 05-18-2006, 12:17 AM

hell yeah especially one wheel peel!!!

race gas tune is where its at, especially floating that accross the interstate. And when i say floating it, thats a literal term, LOL!!

**iloveboost** · 05-18-2006, 12:41 AM

Haha, I didn't even stall the car on the way home. I know I pissed off some neighbors pulling home.

Man, I can't wait for some C16 (or 118), open downpipe action.

**scttydb411** · 05-18-2006, 10:48 AM

how was your ride into work this morning? i know i had trouble driving my light a## clutch on the way home last night after working out on your beast of a clutch.

**iloveboost** · 05-18-2006, 12:02 PM

Haha, sorry about that, Scotty.

I'm going to work at about 2. I may work until about 7 and I'm workin in Acworth, so I'm going against traffic on off-peak hours, LOL.

I'll tell you Friday night when I'm in court in Sandy Springs and drive rush hour both ways.

**SPOOLIN** · 05-18-2006, 12:18 PM

oh god , have fun with that HAHA!!!!

c16 is 117 octane by the way

GET IT TUNED on it FAST YO!!!

**Jzen** · 05-18-2006, 10:08 PM

Somebody post a VIDEO!!!! MIKE!!!

**silviadriftr** · 05-19-2006, 10:27 AM

Originally Posted by Jzen

Somebody post a VIDEO!!!! MIKE!!!

I think Dave was the only person shooting video, but it should be up soon.

**static** · 05-19-2006, 12:04 PM

Sounds pretty good. I hope everything works out good for you. Smoke for v8's all day long.

**Jzen** · 06-05-2006, 04:23 PM

Any updates?

Thread: My modest non-VTEC build. 56k, consider yourself warned...

Thread Tools

Display

Posting Permissions

About us

Announcement