--->92-95 Civic Sedan Running Low Offset Wheels<--- *Info Needed*

[a94civicex]

I'm new to the Low Offset Scene & want some info:

Is anyone rocking 0 to +25 low offset wheels on their 92-95 civic 4dr? Is it possible to run 15x8 with +10 offset on my civic just using my natural camber from my aftermarket suspension & get away with not buying a camber? Or am I going to have run with the camber kit?

If you know where I can get the info or if you know about it, lmk.... I'm thinking about running with Low Offset on my sedan but need to educate myself before I take the steps to doing it!

[Black4DrEK]

Fenders need to be pulled/rolled.

Camber kit probly will be a must.

[a94civicex]

Fenders need to be pulled/rolled.

Camber kit probly will be a must.

Yeah I knew the fenders needed to be rolled/pulled! I know that white_rice had 15x8's with an offset of +10 on my old civic & he just told me he ran with the natural aftermarket suspension camber & just rolled/pulled the fenders & got away with it until he had to turn really sharp but I want to hear from more than one person that it will work like that! I do know that the camber kit will actually make the 15x8's sit flush instead of having the poke stance! Just got to clear all this up before I make the move, ya know?

[Scotsman]

all i had done on mine was fenders rolled , i was rockin zero off sets , only time scrubbed was takin a sharp turn a higher speeds , strut bars probably would have helped that







of course the +10's should fit a lil snugger

[a94civicex]

all i had done on mine was fenders rolled , i was rockin zero off sets , only time scrubbed was takin a sharp turn a higher speeds , strut bars probably would have helped that of course the +10's should fit a lil snugger

Thanks for the info bro!

[Mafdark]

0 offset is going to be serious poke, I highly suggest grabbing a tape measure and calculating the proper offset for a flush fitment if your looking for that instead of the "mexican" poke style. Also, you should keep in mind that anything wider than an 7" wheel is really doing nothing but adding weight at 15" if you're running a street tire. The widest street tire @ 15" is a 225 (or the hankook 245 which is actually the same width as most manufacturer's 225)

[JDMEK18]

x2

[jfryer496]

iom too jealous of that blue 4dr! that shit is nassty as heck lol. i want those wheels BTW! haha

[a94civicex]

So will 15x8, 0 offset with 205/50's & a camber kit sit flush or not on my eg8 after I roll & pull the fenders?

[NoWAyItZTOMmY]

anything can fit!

[LIKEG6]

It won't be flush but look at all these "hellaflush" civics most of em are only flush at the top of the wheel and tire.

I wouldn't do the 0 but maybe a 10-15 would sit better. Just google search if you haven't already.

I think a +15 would work with rolled/pulled fenders and natural camber.

I'm going off of my results having +15 on my old EF hatch which are not nearly as wide as EG's.

[a94civicex]

So here it is- it is sitting a little lower than the pics show, about 2-1/2 coils lower (coilovers sleeves that is) & finished rolling/pulling my front/rear fenders (I'm still going to get a camber kit) but for now it's not rubbing at all on OEM camber.

16x8, +15 offset, xxr 501's with 205/40 nitto neogens.






What do y'all think? Like i said I'm a little lower than the pics currently show & my fenders are all rolled/pulled a good bit compared to what the pics show.

[mr.egd15]

i thik it looks good bro but thats just me

[a94civicex]

i thik it looks good bro but thats just me

Thanks bro, I am installing the camber kit as we speak.

[mr.egd15]

post pics i wanna see how it came out

[95droppedhatch]

ive got 15x7 with a +10 offset and all i had to do was roll my fenders and its on the factory camber ill get some pics of it in alittle bit but i think its a good look if your not wanting to run a camber kit and roll and pull your fenders

[jdm_eg8]

ive got 15x7 with a +10 offset and all i had to do was roll my fenders and its on the factory camber ill get some pics of it in alittle bit but i think its a good look if your not wanting to run a camber kit and roll and pull your fenders

wheels & camber kit were pulled off & sold, just became too much of a hassle with a 16x8 +15 offset, so im currently looking to get 15x7 +10 offset so i wont have to do a camber kit (my fenders are already rolled/pulled)

[loa706]

ill post pics of my eg8 with 0 off set wheels...tire are 205/50/15

[loa706]

and now no camber at all

[loa706]

id say they tucked but camber kit is a must

[Scotsman]

id say they tucked but camber kit is a must

id say , i love your ride

[loa706]

thanks bro

[loa706]

id say , i love your ride

thanks bro

[mikesEK]

ok..... someone bring me up to speed.... i know what ROLLING a fender is........ what is PULLING?!?!

[mikesEK]

So here it is- it is sitting a little lower than the pics show, about 2-1/2 coils lower (coilovers sleeves that is) & finished rolling/pulling my front/rear fenders (I'm still going to get a camber kit) but for now it's not rubbing at all on OEM camber.

16x8, +15 offset, xxr 501's with 205/40 nitto neogens.






What do y'all think? Like i said I'm a little lower than the pics currently show & my fenders are all rolled/pulled a good bit compared to what the pics show.

DAMN GOOD LOOK BRHAA!!!! ...... i JUST decided mos def 16x8 +15 for my wagon!! 94civic... i think thats like effin PERFECT fitment... i hope you have no touching/rubbing

[mushroom_toy]

No offense....but no wonder no ones rubbing bad or scrubbing....there is a lack of low in this thread...

[loa706]

im runnig 0 offset what do u want negetive

[loa706]

No offense....but no wonder no ones rubbing bad or scrubbing....there is a lack of low in this thread...

yup

[mikesEK]

What is PULLING a fender mean?

[90DB1]

16x9 +15 need rear camber front is natural 195/45/16 achillies

[jdm_eg8]

16x9 +15 need rear camber front is natural 195/45/16 achillies

Yeah your eg8 looks good.... Im now on 15x8, +4 offset rota rb's with 195/45 nexens, still natural camber up front with brand new rear camber kit, updated pics soon....

[Cynical 1]

lol...

[jdm_eg8]

Got new wheels & aftermarket camber kit on, just need an alignment to make it perfect:


Wheels are xxr 15x8.25 0 offset
Tires are 195/45r15 nexen n3000

[jdm_eg8]

Running 16x8, +15 offset again, sitting hella'flush now

[LIKEG6]

What wheels are the new ones

[jdm_eg8]

What wheels are the new ones

501's (hyper silver w/polished lip