Quote Originally Posted by kain View Post
you do realize, turbos have a red line. they spin at a given range and that is where they are designed to run. if you break the stream between the turbo and intake, then the turbo's waste gate has no view of the specific pressure it needs to vent, and thus will not ever bypass exhaust gasses, letting the turbo spool to its doom. sometimes it doesn't grasp the imagination on how wickedly fast these spin. remember, this is a turbine. think of a jet engine essentially. anywhere from zero rpm to 200 thousand rpms is whats seen in a turbos lifespan. what would happen if the turbo where to start resonating and somehow the compressor wheel made contact with the compressor housing. your fucked.

the best solution is leave all the pipes connected, but allow the waste gate to somehow vent 100% continuously. this will allow the turbo to not spool, and also allow you to drive the car normally.

just watch out for very long hills that you happen to come across, your turbo might start to spool a tiny bit, but then at 1 psi i doubt anything will break.
Thank you for explaining that bit of info to him. Reps.


But back on topic, i say get a wideband, go to a jy and snag a injector box for free-10bucks and the clip for it, look it up how to wire them up. Then get a chipped ecu and a tune then ull be 100% set.