Well, got as far as I can until Saturday for the most part. I found out that I was missing 2 of the dowels that go to the cam caps when mocking up the head. On Intake cam cap 5 there are no dowels. So I'm going to pick some up and buy small random crap from my tuner. Then commence with putting it in time and adjusting the valves and putting the rest of the pieces on. Well here are a couple of unfinished pics, but close. Just need to install the cams, and adjust timing and the valve lash. BTW the black plastic looks much worse when you take a picture of it. It looks pretty good in person.