So how much would this run?

[93H22ACX]

Just some quick commments and questions...

I doubt anyone really guarantee 700-800whp. It isnt too hard but its still difficult to make that much horsepower.

do you really have 700-800whp or are you stating that that's what you will get?

What's ur setup: fuel, engine, turbo setup if you dont mind me asking...

i would just like to know

[Vteckidd]

few things i saw wrong with your post, correct me if i am wrong.

1) Your only running 3bar map, 700-800whp needs 5 bar, or your revving to 11K rpms.
2) T3/T4 aint big enough , depends how big the trim level is
3) That looks like an SS AUTOCHROME manifold, wont hold 700-800hp.
4) You said 88 civic, thats a EG aka 92-95 honda civic.

Mabe i missed something, can you fill me in. and im not making fun or calling bullshit, im just saying you come from nowhere and claim 600whp, then now you say your gonna make 850whp, and i dont see a dyno posted.

Only 1 guy makes over 800whp locally, its not as easy as you think. good luck.

[jimjam187]

Like I said my old car is the 88. I know the current set up in the picks wont make 700. That was the set up on the 88 just using the old turbo setup to breakin the motor and until I feel like changing them out. CUrrent set up is Full race = length mani. pte68 50mm tail bov, 48mm tial wg,rc 1000's 5bar map, what the hell else do you want to know. Is It really that hard to think someone has a car with hat much power. I dont need a dyno to tell me what kind of power this car will have. I started this build for one thing to have that kind of power. So call BULL SHIT all you want When its ready Ill PM you both and well GO put it on the Dyno of your choice then you can talk all the shit you want. O and ill put the dyno sheet on tonight of the 88 nad would yopu like to see the receipts of my current build I guarantee you I have over $17800 in this build. YEs im new to the forum I wasnt bragging or calling anyone out just tring to help someone to relaize how much it costs to make the power. Even you said VTECKIDD it would cost 10K+. the 88 made 448 to the wheels whit just rods and pistons 750's fuel pump type r cams and the turbo in the picks. SO I have a better build now more fuel built head. what else do I need?

[Vteckidd]

Listen Jackass, go re read what i said:

Maybe i missed something, can you fill me in. and im not making fun or calling bullshit, im just saying you come from nowhere and claim 600whp, then now you say your gonna make 850whp, and i dont see a dyno posted.

I asked to see your setup and you posted that. so you dont need a dyno to tell you how fast it is? lol thats the most retarded statement i have ever heard. So your ass dyno can tell you the difference between 600whp and 800whp? come one man, quit diggin yourself deeper into a hole.

Get it done, then come put it on my dyno, if it makes over 750whp, its free and ill give you $20 for gas, if you make under 700whp, its 100$/HR until you can make it close.

Once again, i never called bullshit, and yes it is hard to believe mr. 26 posts. you have to understand you are making BIG CLAIMS with nothing to back it up excpet for OLD PICS of a turbo setup you have no dyno for.

POost a dyno, and post current pics. im interested to see your build up, i dont care how much money you have in it, it really donesnt mean shit to me nor does it impress me. cause if it only makes 500whp, then it was a waste of money.

good luck

EDIT: I said it would cost more than 10K. it would be around $20k INCLUDING THE CAR and suspension etc. $13k for a motor,tranny,clutch,flywheel,turbo kit, etc aint bad , you said you have 18K in the MOTOR, which is too much money.

[Supacharge]

you dont need anywhere close to 700 whp to run 10s. i would say you are right in saying that you need 20k to make 700 whp. but yes, you can run 10s with 10k, EASY. rlz, who built my motor, is running 10.2 @ 142 with a b16 and a t4 60-1. and that was on PUMP gas. made just over 500whp.

[jimjam187]

O heres a dyno from Jg's web page of a turn key 900+hp b-series motor
and a link to see the 700's too
http://jgenginedynamics.com/HOME%20PAGE.html

[93H22ACX]

Like I said my old car is the 88. I know the current set up in the picks wont make 700. That was the set up on the 88 just using the old turbo setup to breakin the motor and until I feel like changing them out. CUrrent set up is Full race = length mani. pte68 50mm tail bov, 48mm tial wg,rc 1000's 5bar map, what the hell else do you want to know. Is It really that hard to think someone has a car with hat much power. I dont need a dyno to tell me what kind of power this car will have. I started this build for one thing to have that kind of power. So call BULL SHIT all you want When its ready Ill PM you both and well GO put it on the Dyno of your choice then you can talk all the shit you want. O and ill put the dyno sheet on tonight of the 88 nad would yopu like to see the receipts of my current build I guarantee you I have over $17800 in this build. YEs im new to the forum I wasnt bragging or calling anyone out just tring to help someone to relaize how much it costs to make the power. Even you said VTECKIDD it would cost 10K+. the 88 made 448 to the wheels whit just rods and pistons 750's fuel pump type r cams and the turbo in the picks. SO I have a better build now more fuel built head. what else do I need?

listen.. i wasnt calling BS on you. I just wanted to know what ur setup is. Just because you have a PT68 or just because JG makes x amount of horsepower doesnt mean u'll make the same...

we have cars with that much horsepower and friends that are trying to get those numbers and know how easy/hard it is....

if you do make that much horsepower good for you man...

btw.. i never talked shit... re-read my post... i am simply asking some questions