????
u can bore it to 90mm but its not wise. i dont know anybody who would even on aftermarket sleeves.
hell no you cant, even with sleeves max i have EVER seen is 87mm
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
Well, thats intresting....anything is possible with the right cash flow huh ...
with that said glOriginally Posted by Crosswyse
Good luck trying to get that head gasket to seal for anything lenght of time with any kind of power other than maybe N/A.
The G Spot Hero
"Nitrous is like a hot girl with STDS, you know you want to hit it but your afraid of the consequences."
Look at how thin the sleeves are between cylinders....
Then id like to know who sleeved it. Stock bore is 81mm, most guys go 84, RACE cars run 86mm, PRO cars 87mm, never ever heard of 90mm unless it was an H or K Series.
In for more details
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
grimes did it.
The EMPIRE
it's going in a 1995 integra with a gt30r to start with =]
Dave @ Lethal Injection Motorsports
770-343-9969 shop
that doesnt look like 90mm to me... it looks to be about 3.25-3.3 which would be from 82-84mm
GCO Member
NRA Member
i just walked over there with my digital calipers.
the official weigh in
it's 3.410 inchs = 86.62 mm bore
with 4mm of sleeve inbetween the cylinders
Dave =]
no reason too do it, you can make 800whp out of 84mm, why be different?
good luck
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
let us know how long it lasts
man everyone is a bunch of debbie downers.
90mm lolol! What compression? It would crack in between the cylinders with any amount of boost. I'd give less than a day.
Now 86.62mm is believable. Still retarded but whatever. DD?
5 years ago I posted a dyno vid on here after we bored a B20z to 86mm for RSX-S pistons using an undisclosed stock connecting rod, topped with a built b16 head. N/A 207hp/155ft-lbs
lol! Coming from someone that's never made a knowledgeable contribution to the Forced Induction [or NA] forum(s) other than one post regarding a rotary engine.Originally Posted by Nick Jeezy
![]()
http://www.importatlanta.com/forums/...archid=3001617
what a waste of money
Good luck puttin 90mm pistons in a 87mm hole. Wish I had that problem! Oh yeah Dave: told ya so LOL!
Dyno Sheet pleaseOriginally Posted by Crosswyse
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
hell you can make 1000+ on 84mm lol
www.MSSRACING.com - 99 Civic CX - Best ET: 9.53 / Best MPH: 160 - Competition Clutch - Arias Pistons - Coatings M.D. - Mahle-Clevite - ebtec - AHobbs Racing - JKOBD - TDC Performance
Daily D: 2007 Dodge 2500 MEGA CAB, Cummins Turbo Diesel
na he wants to see 1 of that 1. there should be 1 if it made it an entire season.Originally Posted by Crosswyse
Originally Posted by Crosswyse
right u sound like ever other dumbass noob.Originally Posted by Crosswyse
find somebody who has.Originally Posted by Crosswyse
Originally Posted by Crosswyse
Lol right...
The EMPIRE
lol
Originally Posted by speedminded
lol well theres one post that was useful.
![]()