gsr build cant figure out why its burning oil

[mitch lab]

y did u take it apart. y not just do a compression and leak down test.

x2 on that

When you installed the rings, did you check to see if the marking were up and were they position right? And when the pistons was in did you check for play? Did the new valve seals seat in right? I would have used oem valve seals. When you pull the header off did you see any oil in the exhaust port?

[jap_racer1]

x2 on that

When you installed the rings, did you check to see if the marking were up and were they position right? And when the pistons was in did you check for play? Did the new valve seals seat in right? I would have used oem valve seals. When you pull the header off did you see any oil in the exhaust port?

ok all the things you listed yes they are done right an di did check and there is oil coming out of cylinder 1 exhaust on the muffler and it has flowed al the way to the cat and it is pretty thick then when i put it back together last night efter cleaning everything i cut it on for about 1 min if even and took the header off and it is completely covered

help man!